> > Architectural Engineering MCQs > Drawing communication MCQs

Drawing communication MCQ

1. What is the name for devices used to join electronic components together?

Connectors

Switches

Circuit boards

Wires

Answer

Correct Answer: Connectors

Note: This Question is unanswered, help us to find answer for this one

2. Which of the following is NOT a type of connector?

Plug

Fastener

Receptacle

Jack

Answer

Correct Answer: Fastener

Note: This Question is unanswered, help us to find answer for this one

3. What is the connection list?

A list of all the electronic components in a circuit.

The list of all connections that need to be made between components on an electronic circuit board.

A list of all the connections in a circuit.

The list of all the components on an electronic circuit board.

Answer

Correct Answer: The list of all connections that need to be made between components on an electronic circuit board.

Note: This Question is unanswered, help us to find answer for this one

4. Conics are single-curved lines that can be described in ____ ways.

Many more

Many

Some

Few

Answer

Correct Answer: Many

Note: This Question is unanswered, help us to find answer for this one

5. Conics are sections of which of the following figures?

A cylinder

A pyramid

A square

A right circular cone

Answer

Correct Answer: A right circular cone

Note: This Question is unanswered, help us to find answer for this one

6. What is the term used to describe the amount of space visible by the human eye looking in a fixed direction?

Semicircle of vision

Cone of vision

Hemisphere of vision

Circle of vision

Answer

Correct Answer: Cone of vision

Note: This Question is unanswered, help us to find answer for this one

7. What is the most common type of cone?

Cone-shaped cone

Right circular cone

Pyramid-shaped cone

Oval-shaped cone

Answer

Correct Answer: Right circular cone

Note: This Question is unanswered, help us to find answer for this one

8. What is the definition of concurrent?

Involving all members of the design process working simultaneously

Working on numerous steps one after another (serially)

The technique of organizing numerous steps so that they happen in parallel rather than one after another (serially)

Close coordination with each other

Answer

Correct Answer: The technique of organizing numerous steps so that they happen in parallel rather than one after another (serially)

Note: This Question is unanswered, help us to find answer for this one

9. What is the definition of "conciseness"?

A CAD database that is not concise takes up more space on the computer's hard drive.

A concise CAD database means that there is less room for error.

A concise database is one in which each record takes up less space.

The more concise the database, the less space each record takes in the hard drive of the computer.

Answer

Correct Answer: The more concise the database, the less space each record takes in the hard drive of the computer.

Note: This Question is unanswered, help us to find answer for this one

10. What are the common reinforcing elements used in composites?

Carbon/graphite and boron

Carbon/graphite, boron, and Kevlar (aramid)

Glass fibers and resin

Glass fibers, resin, and wood

Answer

Correct Answer: Carbon/graphite, boron, and Kevlar (aramid)

Note: This Question is unanswered, help us to find answer for this one

11. What is a common composite?

Kevlar

Boron

Fiberglass

Carbon/Graphite

Answer

Correct Answer: Fiberglass

Note: This Question is unanswered, help us to find answer for this one

12. What is a color lookup table?

A way to print in color

A way to store colors in a computer

A device that allows a user to see colors

A modular database that allows colors to be mapped to specific data values in a visualization.

Answer

Correct Answer: A modular database that allows colors to be mapped to specific data values in a visualization.

Note: This Question is unanswered, help us to find answer for this one

13. What is the perceptual quality of a surface that results from the combined response to lightness, hue, and value?

Color

Pattern

Shape

Texture

Answer

Correct Answer: Color

Note: This Question is unanswered, help us to find answer for this one

14. What does CNC stand for?

Crooked nose crew

Central nervous system

Certificates of naturalization and citizenship

Computer numeric control

Answer

Correct Answer: Computer numeric control

Note: This Question is unanswered, help us to find answer for this one

15. What is the condition required for a group of edges to form a face on an object?

The edges must be connected side by side.

The edges can be of any length.

The edges must be connected end to end, forming a continuous path around the perimeter of the face.

There must be at least 3 edges.

Answer

Correct Answer: The edges must be connected end to end, forming a continuous path around the perimeter of the face.

Note: This Question is unanswered, help us to find answer for this one

16. What is the clock speed measured in?

Megahertz (MHz)

Terahertz (THz)

Petahertz (PHz)

Gigahertz (GHz)

Answer

Correct Answer: Megahertz (MHz)

Note: This Question is unanswered, help us to find answer for this one

17. What is the process of removing portions of lines or surfaces that reside outside the view volume called?

Animation

Clipping

Scan Conversion

Rasterization

Answer

Correct Answer: Clipping

Note: This Question is unanswered, help us to find answer for this one

18. Which of the following is not a type of fit?

Transition fit

Line fit

Clearance fit

Interference fit

Answer

Correct Answer: Clearance fit

Note: This Question is unanswered, help us to find answer for this one

19. What is the resulting space called when two mating parts leave a space when assembled?

An allowance or a clearance

An interference fit

A gap

A tight fit

Answer

Correct Answer: An allowance or a clearance

Note: This Question is unanswered, help us to find answer for this one

20. What is a kinematic analysis using the Boolean intersection operation used for?

Analyzing the forces in a mechanism

Determining the motion of a mechanism

Evaluating clashes in computer models of a mechanism

Creating a computer model of a mechanism

Answer

Correct Answer: Evaluating clashes in computer models of a mechanism

Note: This Question is unanswered, help us to find answer for this one

21. What is civil engineering?

A field of engineering focused on the design of buildings and other structures.

A branch of engineering focused on the study of natural disasters and their prevention.

A field of engineering involving the production of military equipment.

A field of engineering involved with planning, design, construction, operation, and maintenance of transportation, environmental, and construction systems.

Answer

Correct Answer: A field of engineering involved with planning, design, construction, operation, and maintenance of transportation, environmental, and construction systems.

Note: This Question is unanswered, help us to find answer for this one

22. What is the component side of a printed circuit board?

The opposite side of the circuit side.

The side of the board where the majority of the circuit connections for components are NOT made.

The same side as the circuit side.

The side of the board where a majority of the circuit connections for components are made.

Answer

Correct Answer: The side of the board where the majority of the circuit connections for components are NOT made.

Note: This Question is unanswered, help us to find answer for this one

23. What is the opposite side of the circuit side called?

Ground side

Foil side

Component side

Power side

Answer

Correct Answer: Component side

Note: This Question is unanswered, help us to find answer for this one

24. A circle is described as a(n) _______.

Angle

360-degree arc

Closed, planar curve

Open, planar curve

Answer

Correct Answer: 360-degree arc

Note: This Question is unanswered, help us to find answer for this one

25. What does the acronym CIM stand for?

Credit Information Management

Computer-Integrated Manufacturing

Commercial Information Management

Consolidated Information Management

Answer

Correct Answer: Computer-Integrated Manufacturing

Note: This Question is unanswered, help us to find answer for this one

26. What is a check print?

A type of hard-copy output used to check the accuracy and format of a technical drawing.

A method of inputting data

A method of storing data

A type of soft-copy output

Answer

Correct Answer: A type of hard-copy output used to check the accuracy and format of a technical drawing.

Note: This Question is unanswered, help us to find answer for this one

27. What is the definition of ceramics?

Synthetic materials made from polymers

Organic materials made from plant or animal products

Materials, usually with crystal structures, created from compounds of metallic and nonmetallic elements.

Inorganic materials that do not contain carbon atoms

Answer

Correct Answer: Materials, usually with crystal structures, created from compounds of metallic and nonmetallic elements.

Note: This Question is unanswered, help us to find answer for this one

28. From which view are distances and features projected or measured to create the adjacent views?

Isometric view

Central view

Bottom view

Top view

Answer

Correct Answer: Central view

Note: This Question is unanswered, help us to find answer for this one

29. What is the purpose of center lines?

To represent symmetry and paths of motion

To mark the boundaries of objects

To represent geometry directly

To mark the centers of circles and the axes of symmetrical parts

Answer

Correct Answer: To represent symmetry and paths of motion

Note: This Question is unanswered, help us to find answer for this one

30. What does CD-ROM stand for?

Compact disk-re-writable

Certificate of deposit-read only memory

Compact disk-read only memory

Compact disk-random access memory

Answer

Correct Answer: Compact disk-read only memory

Note: This Question is unanswered, help us to find answer for this one

31. What is the receding axis typically drawn at an angle of?

45 and 90 degrees

30 and 45 degrees

60 and 90 degrees

Between 45 and 60 degrees.

Answer

Correct Answer: Between 45 and 60 degrees.

Note: This Question is unanswered, help us to find answer for this one

32. Who first introduced the Cartesian coordinate system?

Rene Descartes

Pierre de Fermat

Isaac Newton

Gottfried Wilhelm Leibniz

Answer

Correct Answer: Rene Descartes

Note: This Question is unanswered, help us to find answer for this one

33. What is a cap screw?

A nut that screws onto a bolt

A device used to measure screw length

A mechanical threaded fastener with a head on one end, used to screw into a mating part.

A type of screw without a head.

Answer

Correct Answer: A mechanical threaded fastener with a head on one end, used to screw into a mating part.

Note: This Question is unanswered, help us to find answer for this one

34. CAPP is an expert computer system that can be used to determine the optimal sequence of operations for a ____.

Part

Computer

Process

System

Answer

Correct Answer: Part

Note: This Question is unanswered, help us to find answer for this one

35. What does CAPP stand for?

Continuous automatic production planning

Capital appreciation protection plan

Computer-aided process planning

Computer-assisted production planning

Answer

Correct Answer: Computer-aided process planning

Note: This Question is unanswered, help us to find answer for this one

36. What is the purpose of a cam follower?

To trace the surface of a rotating cam

To cut threads

To provide linear reciprocating motion

To act as a doorstop

Answer

Correct Answer: To trace the surface of a rotating cam

Note: This Question is unanswered, help us to find answer for this one

37. What is the full form of CAM?

Computer application in manufacturing

Cybernetics and automation for manufacturing

Computer-assisted manufacturing

Computer-aided manufacturing

Answer

Correct Answer: Computer-aided manufacturing

Note: This Question is unanswered, help us to find answer for this one

38. How does a cam transform rotary motion into reciprocating motion?

By using hydraulics

By using a rolling or sliding contact with another part called a cam follower.

By using a gear system

By using a pulley system

Answer

Correct Answer: By using a rolling or sliding contact with another part called a cam follower.

Note: This Question is unanswered, help us to find answer for this one

39. What is a callout?

A type of paper

A type of font

A printing company

A line balloon

Answer

Correct Answer: A line balloon

Note: This Question is unanswered, help us to find answer for this one

40. What does the acronym CAD stand for?

Computer-aided drafting, computer-aided design, or computer-aided design/drafting.

Creative Arts and Design

College of Architecture and Design

Answer

Correct Answer: Computer-aided drafting, computer-aided design, or computer-aided design/drafting.

Note: This Question is unanswered, help us to find answer for this one

41. What is the receding axis drawn at in a cabinet oblique drawing?

An angle of between 75 and 90 degrees

An angle of between 60 and 75 degrees

An angle of between 30 and 45 degrees

An angle of between 45 and 60 degrees

Answer

Correct Answer: An angle of between 45 and 60 degrees

Note: This Question is unanswered, help us to find answer for this one

42. What is bump mapping?

A way to create textures for 3D models

A technique for 3D printing

A rendering technique used to add surface detail to a model

A method of data compression

Answer

Correct Answer: A rendering technique used to add surface detail to a model

Note: This Question is unanswered, help us to find answer for this one

43. What does a B-spline curve approximate?

2-D curves

3-D surface patches

A parametrically defined freeform curve

A set of control points

Answer

Correct Answer: A parametrically defined freeform curve

Note: This Question is unanswered, help us to find answer for this one

44. What is a broken-out section?

A section view used to hide interior features of a part by breaking away a portion of the object.

A section view used to reveal exterior features of a part by breaking away a portion of the object.

A section view used to reveal interior features of a part by breaking away a portion of the object.

A section view used to hide exterior features of a part by breaking away a portion of the object.

Answer

Correct Answer: A section view used to reveal interior features of a part by breaking away a portion of the object.

Note: This Question is unanswered, help us to find answer for this one

45. What is the name for freehand lines used to show where an object is broken to reveal interior features of a part?

Hidden lines

Break lines

Reference lines

Center lines

Answer

Correct Answer: Break lines

Note: This Question is unanswered, help us to find answer for this one

46. How many solutions to a design problem are possible through brainstorming?

As many as possible

Answer

Correct Answer: As many as possible

Note: This Question is unanswered, help us to find answer for this one

47. What is a bounding box?

An imaginary box representing the maximum dimensions of the object being drawn

A three-dimensional box

The boundary of a circle

A box that bounds an angle

Answer

Correct Answer: An imaginary box representing the maximum dimensions of the object being drawn

Note: This Question is unanswered, help us to find answer for this one

48. What does a bounding box represent?

The minimum dimensions of the object being drawn

The average dimensions of the object being drawn

The maximum dimensions of the object being drawn

The exact dimensions of the object being drawn

Answer

Correct Answer: The maximum dimensions of the object being drawn

Note: This Question is unanswered, help us to find answer for this one

49. What does B-rep stand for?

Binary representation

Boundary representation

Beginning representation

Breaking representation

Answer

Correct Answer: Boundary representation

Note: This Question is unanswered, help us to find answer for this one

50. What are Boolean operations?

The study of the mathematical properties of shapes.

Local operations used to define the relationship between two geometric objects.

3-D modeling software

A type of 3-D printer

Answer

Correct Answer: Local operations used to define the relationship between two geometric objects.

Note: This Question is unanswered, help us to find answer for this one

51. What is bonding?

A process in which two materials are joined together without the use of a hardening liquid

A process in which a material is added to an assembly to hold parts together

A process in which two materials are joined together using a hardening liquid

A process in which a material is removed from an assembly to hold parts together

Answer

Correct Answer: A process in which a material is added to an assembly to hold parts together

Note: This Question is unanswered, help us to find answer for this one

52. What is the purpose of a bolt?

To clamp the material between the head and nut

To screw two pieces of wood together

To fix a loose doorknob

To hold a mirror in place

Answer

Correct Answer: To clamp the material between the head and nut

Note: This Question is unanswered, help us to find answer for this one

53. What does boldface text mean?

A style of text in which the lines that make up the letters are the same thickness as normal.

A style of text in which the lines that make up the letters are double the thickness of normal.

A style of text in which the lines that make up the letters are thicker than normal.

A style of text in which the lines that make up the letters are thinner than normal.

Answer

Correct Answer: A style of text in which the lines that make up the letters are thicker than normal.

Note: This Question is unanswered, help us to find answer for this one

54. What is a block diagram?

A detailed diagram that slowly identifies the relationships between systems, groups, people, or other physical or abstract entities.

A diagram that quickly identifies the relationships between systems, groups, people, or other physical or abstract entities

A diagram that slowly identifies the relationships between systems, groups, people, or other physical or abstract entities

A relatively simple diagram that quickly identifies the relationships between systems, groups, people, or other physical or abstract entities.

Answer

Correct Answer: A relatively simple diagram that quickly identifies the relationships between systems, groups, people, or other physical or abstract entities.

Note: This Question is unanswered, help us to find answer for this one

55. What is a blind hole?

A hole that does not go completely through the material.

A hole that is not straight

A hole that is significantly smaller than the drill bit.

A hole that only goes halfway through the material

Answer

Correct Answer: A hole that does not go completely through the material.

Note: This Question is unanswered, help us to find answer for this one

56. What is a bird's eye view?

A decorative element often used in quilts

A type of map

A perspective pictorial where the viewpoint is looking down from above the object

A perspective pictorial where the viewpoint is looking up at the object from below

Answer

Correct Answer: A perspective pictorial where the viewpoint is looking down from above the object

Note: This Question is unanswered, help us to find answer for this one

57. What is a binary tree?

A hierarchical, logical structure used to organize related elements.

A type of coding language

A data structure that employs two nodes

A mathematical formula used to calculate the area of a shape

Answer

Correct Answer: A hierarchical, logical structure used to organize related elements.

Note: This Question is unanswered, help us to find answer for this one

58. A bill of materials is a:

Listing of parts or materials used in an assembled object

Legend for a map

Map of an area

Geological feature

Answer

Correct Answer: Listing of parts or materials used in an assembled object

Note: This Question is unanswered, help us to find answer for this one

59. Which of the following is NOT a type of cubic function?

Lagrange

B-spline

Catmull-Rom

Bezier

Answer

Correct Answer: B-spline

Note: This Question is unanswered, help us to find answer for this one

60. What is business intelligence?

A way to enhance customer relationships

The consolidation and analysis of raw business data to produce actionable information that gives a company a competitive edge.

A risk-reduction strategy for new businesses

A method of creating new sales opportunities

Answer

Correct Answer: The consolidation and analysis of raw business data to produce actionable information that gives a company a competitive edge.

Note: This Question is unanswered, help us to find answer for this one

61. What is a Bezier curve?

A special case of the B-spline curve.

A type of mathematical function

A curve used in engineering

A curve used in animation

Answer

Correct Answer: A special case of the B-spline curve.

Note: This Question is unanswered, help us to find answer for this one

62. What are bearings designed to do?

Increase friction between two surfaces

Reduce energy lost to friction

Transfer radial or axial loads from a shaft while minimizing energy loss due to friction from the rotating shaft.

Decrease the amount of force needed to move an object.

Answer

Correct Answer: Transfer radial or axial loads from a shaft while minimizing energy loss due to friction from the rotating shaft.

Note: This Question is unanswered, help us to find answer for this one

63. What is the basic size?

The size of an object before it is increased in size

The amount of space allowed between two objects

The size of an object after it has been reduced in size

A tolerancing measure used to describe the theoretical size used as a starting point for the application of tolerances.

Answer

Correct Answer: A tolerancing measure used to describe the theoretical size used as a starting point for the application of tolerances.

Note: This Question is unanswered, help us to find answer for this one

64. What is the basic dimension?

The size of a feature plus or minus the tolerance.

A theoretical exact size.

A tolerancing measure used to describe the theoretically exact size of a feature.

A unit of measurement.

Answer

Correct Answer: A tolerancing measure used to describe the theoretically exact size of a feature.

Note: This Question is unanswered, help us to find answer for this one

65. The base feature creates the initial geometry of the model from which additional geometry can be _______.

Edited

Deleted

Created

Added or subtracted

Answer

Correct Answer: Added or subtracted

Note: This Question is unanswered, help us to find answer for this one

66. What is a bar graph?

A graph in which one dimension represents the independent variable and the other represents the dependent variable.

A graph in which all three dimensions represent the dependent variable.

A graph in which two dimensions represent the independent variable and the other represents the dependent variable.

A graph in which one dimension represents the dependent variable and the other represents the independent variable.

Answer

Correct Answer: A graph in which one dimension represents the independent variable and the other represents the dependent variable.

Note: This Question is unanswered, help us to find answer for this one

67. What is backface culling?

A rendering technique that removes all faces of the model that will be completely hidden from view.

A method of 3D object construction that removes all faces of the model that will be completely hidden from view.

A preprocessing step that removes all faces of the model that will be completely hidden from view.

A postprocessing step that removes all faces of the model that will be completely hidden from view.

Answer

Correct Answer: A preprocessing step that removes all faces of the model that will be completely hidden from view.

Note: This Question is unanswered, help us to find answer for this one

68. What is the full form of B2B?

Business to Business

Bank to Business

Business to Customer

Bank to Customer

Answer

Correct Answer: Business to Business

Note: This Question is unanswered, help us to find answer for this one

69. What is the angle between the object and the projection plane in an axonometric projection?

The angle is 90 degrees

The angle is 30 degrees

The angle is 45 degrees

The angle is rotated on an axis relative to the projection plane.

Answer

Correct Answer: The angle is rotated on an axis relative to the projection plane.

Note: This Question is unanswered, help us to find answer for this one

70. What are the axes used to define the orientation of the primary dimensions in an axonometric pictorial projection called?

Axonometric axes

X-Axis

Z-Axis

Y-Axis

Answer

Correct Answer: Axonometric axes

Note: This Question is unanswered, help us to find answer for this one

71. How many axes are used to define the orientation of the primary dimensions in an axonometric pictorial projection?

One

Two

Four

Three

Answer

Correct Answer: Three

Note: This Question is unanswered, help us to find answer for this one

72. What is the definition of axis?

The line or vector representing a center of rotation

A three-dimensional figure

The distance between two points

A straight line that intersects a curve

Answer

Correct Answer: The line or vector representing a center of rotation

Note: This Question is unanswered, help us to find answer for this one

73. What are auxiliary views used for?

To derive a view from an image plane that is not the frontal, horizontal, or profile plane.

To derive a view from the frontal, horizontal, or profile plane.

To find the depth, height, or width of an object.

To find the volume of an object.

Answer

Correct Answer: To derive a view from an image plane that is not the frontal, horizontal, or profile plane.

Note: This Question is unanswered, help us to find answer for this one

74. What is an auxiliary view?

A section view derived from an auxiliary view.

An orthographic drawing that uses auxiliary views.

A view that shows all hidden lines.

A view drawn to scale using auxiliary lines.

Answer

Correct Answer: A section view derived from an auxiliary view.

Note: This Question is unanswered, help us to find answer for this one

75. What is autorouting?

A type of book

A process of hardening steel

A specialized software process that suggests routing connections between components on a circuit board.

A software that helps you design houses

Answer

Correct Answer: A specialized software process that suggests routing connections between components on a circuit board.

Note: This Question is unanswered, help us to find answer for this one

76. What does authoring refer to?

The process of recording a song

The process of using computer programming tools to assemble different media into an interactive presentation.

The process of writing a book

The process of painting a picture

Answer

Correct Answer: The process of using computer programming tools to assemble different media into an interactive presentation.

Note: This Question is unanswered, help us to find answer for this one

77. What is a section view of multiple parts in an assembly called?

Cross section

Part section

Detail section

Assembly section

Answer

Correct Answer: Assembly section

Note: This Question is unanswered, help us to find answer for this one

78. What is a fabrication drawing?

A drawing done by an architect

A drawing that provides detailed information on how a product is to be manufactured

A drawing that shows how a machine works

A drawing of a work of art

Answer

Correct Answer: A drawing that provides detailed information on how a product is to be manufactured

Note: This Question is unanswered, help us to find answer for this one

79. What is the purpose of an artistic drawing?

To be used as a reference for a future project.

To be a record of previous work.

To communicate clear, concise information pertaining to a design.

To express aesthetic, philosophical, and abstract ideas.

Answer

Correct Answer: To express aesthetic, philosophical, and abstract ideas.

Note: This Question is unanswered, help us to find answer for this one

80. What is the dependent variable in an arrow plot?

Data set

Scalar

Vector

Region

Answer

Correct Answer: Vector

Note: This Question is unanswered, help us to find answer for this one

81. Which of the following is not a type of array?

Linear

Geometric

Radial

Angular

Answer

Correct Answer: Linear

Note: This Question is unanswered, help us to find answer for this one

82. What is an array in computer programming?

A way to copy and paste data

A code optimization technique

A software development methodology

A geometry of a single feature being duplicated in a regular fashion in a model.

Answer

Correct Answer: A geometry of a single feature being duplicated in a regular fashion in a model.

Note: This Question is unanswered, help us to find answer for this one

83. What does area rendering refer to in data visualization?

A data visualization technique in which the pixels in a 2-D line are each assigned a value.

A data visualization technique in which the pixels in a 2-D area are each assigned a value.

A data visualization technique in which the pixels in a 2-D point are each assigned a value.

A data visualization technique in which the pixels in a 3-D area are each assigned a value.

Answer

Correct Answer: A data visualization technique in which the pixels in a 2-D area are each assigned a value.

Note: This Question is unanswered, help us to find answer for this one

84. What does the term "archiving" refer to?

Storing of computer-generated information on magnetic or optical media

Storing and retrieval process for legal documents

Storing and retrieval process for engineering documentation

Storing and retrieval process for medical records

Answer

Correct Answer: Storing and retrieval process for engineering documentation

Note: This Question is unanswered, help us to find answer for this one

85. What is the sense of motion induced by rapidly displaying a series of images of an object called?

Random motion

Continuous motion

Linear motion

Apparent motion

Answer

Correct Answer: Apparent motion

Note: This Question is unanswered, help us to find answer for this one

86. Angularity is a condition of a surface, center plane, or axis at an angle other than a right angle to what?

A datum plane or datum axis

A wall

Another surface

The ground

Answer

Correct Answer: A datum plane or datum axis

Note: This Question is unanswered, help us to find answer for this one

87. What is the angle?

The product of the lengths of the two lines

The length of one of the two lines

The sum of the lengths of the two lines

The relative orientation of two linear elements with respect to each other.

Answer

Correct Answer: The relative orientation of two linear elements with respect to each other.

Note: This Question is unanswered, help us to find answer for this one

88. What does analytic geometry refer to?

The study of curved lines

A method of describing 3-D solid models

The analysis of geometric structures and properties, principally using algebraic operations and position coordinates.

The study of planes

Answer

Correct Answer: The analysis of geometric structures and properties, principally using algebraic operations and position coordinates.

Note: This Question is unanswered, help us to find answer for this one

89. What is an ambient light source?

A light source that is not natural.

A light source defined by its lack of orientation or location.

A device that measures the amount of light in an area.

A light source that is focused or directed at an object.

Answer

Correct Answer: A light source defined by its lack of orientation or location.

Note: This Question is unanswered, help us to find answer for this one

90. What is the approximate ellipse created by the alternate four-center ellipse method?

Four-center ellipse

Cavalier oblique drawings

Rectangle

Oval

Answer

Correct Answer: Cavalier oblique drawings

Note: This Question is unanswered, help us to find answer for this one

91. How many linestyles are specified by ANSI?

Answer

Correct Answer: 3

Note: This Question is unanswered, help us to find answer for this one

92. How many standard linestyles are there for technical drawing?

Answer

Correct Answer: 5

Note: This Question is unanswered, help us to find answer for this one

93. What is the purpose of an allowance?

To describe the minimum clearance or maximum interference between parts.

To decrease the chance of interference

To describe the tightest fit between two mating parts

To provide extra space for tolerance

Answer

Correct Answer: To describe the minimum clearance or maximum interference between parts.

Note: This Question is unanswered, help us to find answer for this one

94. What is an aligned section?

A section view that is not in true projection.

A section view created by bending the cutting plane line to pass through an angled feature.

A section view in which the cutting plane line is parallel to the projection plane.

A section view in which the cutting plane line is perpendicular to the projection plane.

Answer

Correct Answer: A section view created by bending the cutting plane line to pass through an angled feature.

Note: This Question is unanswered, help us to find answer for this one

95. What is the main concern of agricultural engineering?

Production agriculture and its natural resource base

The maintenance and management of agricultural infrastructure

The processing and chemistry of biological materials for food and industrial products

The design and implementation of agricultural processes and systems

Answer

Correct Answer: Production agriculture and its natural resource base

Note: This Question is unanswered, help us to find answer for this one

96. What are the artistic qualities or aspects that elicit an emotional response to an object called?

Artifice

Awkwardness

Aesthetics

Amateurs

Answer

Correct Answer: Aesthetics

Note: This Question is unanswered, help us to find answer for this one

97. What is aerospace engineering?

A field of engineering concerned with the design and operation of bridges and roads.

A field of engineering concerned with the design and operation of aircraft, missiles, and space vehicles.

A field of engineering concerned with the design and operation of aircraft and missiles.

A field of engineering concerned with the design of aircraft and missiles.

Answer

Correct Answer: A field of engineering concerned with the design and operation of aircraft, missiles, and space vehicles.

Note: This Question is unanswered, help us to find answer for this one

98. Which of the following is NOT an example of adjacent views?

Front and bottom views

Front and top views

Front and left side views

Front and right side views

Answer

Correct Answer: Front and top views

Note: This Question is unanswered, help us to find answer for this one

99. What is an adjacent view?

A view that is not adjacent to another view

Orthographic views that are aligned to each other, allowing dimensional information to be shared

A view of an object from the front

A view that does not show all sides of an object

Answer

Correct Answer: Orthographic views that are aligned to each other, allowing dimensional information to be shared

Note: This Question is unanswered, help us to find answer for this one

100. Additive primaries are the three primary colors: ___, _, and ___.

Green, yellow, and cyan

Cyan, magenta, and yellow

Red, green, and blue

Red, yellow, and blue

Answer

Correct Answer: Red, green, and blue

Note: This Question is unanswered, help us to find answer for this one

101. What is the opposite of additive?

Additive

Subtractive

Multiplicative

Derivative

Answer

Correct Answer: Subtractive

Note: This Question is unanswered, help us to find answer for this one

102. What is the actual size a tolerancing measure used to describe?

The size of a part before machining

The size of a part during machining

The size of a finished part after machining

The size of a part after assembly

Answer

Correct Answer: The size of a finished part after machining

Note: This Question is unanswered, help us to find answer for this one

103. What is Actual Size?

The size of a part without any finish applied

The size of a part after a certain finish is applied

A tolerancing measure used to describe the size of a finished part after machining.

A finish that is applied to a part

Answer

Correct Answer: A tolerancing measure used to describe the size of a finished part after machining.

Note: This Question is unanswered, help us to find answer for this one

104. An example of an absolute scale is?

Richter magnitude scale

PH scale

Kelvin temperature scale

Fahrenheit temperature scale

Answer

Correct Answer: Kelvin temperature scale

Note: This Question is unanswered, help us to find answer for this one

105. What is the absolute coordinate system also called?

The local coordinate system

The world or global coordinate system

The relative coordinate system

The object coordinate system

Answer

Correct Answer: The world or global coordinate system

Note: This Question is unanswered, help us to find answer for this one

Architectural Engineering MCQs | Topic-wise

MCQ on Architectural and Engineering Drawing	MCQ on Architectural design
MCQ on Art and design	MCQ on Basic Architectural Engineering
MCQ on Building Materials and Construction	MCQ on Building construction
MCQ on Built environment and space culture	MCQ on Climatology
MCQ on Communications and HVAC	MCQ on Computer Programming and Numerical Analysis
MCQ on Computer and technology	MCQ on Drawing communication
MCQ on Electrical Systems for Buildings	MCQ on Energy systems and fire safety
MCQ on Engineering Mathematics	MCQ on Environmental Control Systems
MCQ on Foundation Engineering	MCQ on Geotechnical Engineering
MCQ on History of Building Technology	MCQ on History of architecture
MCQ on Hydraulics for Architectural Engineers	MCQ on Introduction to Architectural Engineering
MCQ on Introduction to Computing	MCQ on Lighting and Illumination
MCQ on Lighting and acoustics	MCQ on Mechanical Systems for Buildings
MCQ on Mechanics and Statistics	MCQ on Mechanics of Structures
MCQ on Model workshop	MCQ on Physics for Architectural Engineers
MCQ on Professional practice	MCQ on Sociology
MCQ on Structural Design	MCQ on Surveying
MCQ on Technical Report Writing	MCQ on Theory of architecture
MCQ on Theory of structures	MCQ on Town planning
MCQ on Urban issues	MCQ on Water Supply and Sanitation System for Building
General Architectural Engineering MCQs