1. Manufacturing of capillary electrophoresis chips has an application of which of the following process?
Answer
Correct Answer:
Abrasive jet machining
Note: This Question is unanswered, help us to find answer for this one
2. Which of the following is the odd-one out?
Answer
Correct Answer:
Micro-EBM
Note: This Question is unanswered, help us to find answer for this one
3. Why do the pore characteristics of the resulting pSi structures depend upon the doping type? Choose the most correct option.
Answer
Correct Answer:
The pore formation mechanism relies on doping
Note: This Question is unanswered, help us to find answer for this one
4. According to which of the following Porous materials are classified?
Answer
Correct Answer:
Pore size
Note: This Question is unanswered, help us to find answer for this one
5. Which of the following manufacturing process is favourable for making tool for ECM?
Answer
Correct Answer:
Cold forging
Note: This Question is unanswered, help us to find answer for this one
6. Which of the following is correct about ECG?
Answer
Correct Answer:
Burr-free sharpening of needles
Note: This Question is unanswered, help us to find answer for this one
7. Which of the following is the most common material used to produce forming rolls?
Answer
Correct Answer:
Oil hardened tool steels
Note: This Question is unanswered, help us to find answer for this one
8. What causes an un-proportionally thin and high tooth in the toe region, and a short and thick tooth at the heel?
Answer
Correct Answer:
Difference in outer and inner circumference of the generating g
Note: This Question is unanswered, help us to find answer for this one
9. For helical gears, the angle between hob’s spindle axis and workpiece’s spindle axis must be _____ as the helix angle of the helical gear.
Answer
Correct Answer:
Increased by the same amoun
Note: This Question is unanswered, help us to find answer for this one
10. In the manufacturing of hole and shaft, the maximum shaft diameter was 49.88 mm and the minimum hole diameter was found to be 49.94 mm. Which of the following is correct?
Answer
Correct Answer:
Clearance fit
Note: This Question is unanswered, help us to find answer for this one
11. For manufacturing of a certain amount of hole, maximum hole size was found to be 50.14 mm and minimum hole size was found to be 49.98. What will be the Tolerance in mm?
Answer
Correct Answer:
0.16
Note: This Question is unanswered, help us to find answer for this one
12. Which of the following is used to form Complex shapes effectively?
Answer
Correct Answer:
Powder metallurgy
Note: This Question is unanswered, help us to find answer for this one
13. In which of the following casting process the sand is mixed with a thermosetting resin to form a mould?
Answer
Correct Answer:
Shell moulding
Note: This Question is unanswered, help us to find answer for this one
14. Which of the following casting technique has a greater impact in semiconductor industry?
Answer
Correct Answer:
Single crystal
Note: This Question is unanswered, help us to find answer for this one
15. Which of the following forging operation is Heading?
Answer
Correct Answer:
Upsettin
Note: This Question is unanswered, help us to find answer for this one
16. Which of the following are cleaning fluids?
Answer
Correct Answer:
All of the mentioned
Note: This Question is unanswered, help us to find answer for this one
17. Which of the following software is used to control the computer’s work flow, organize its data and perform house keeping functions?
Answer
Correct Answer:
Operating software
Note: This Question is unanswered, help us to find answer for this one
18. Which of the following operation is used to make a ball bearing?
Answer
Correct Answer:
Skew rolling
Note: This Question is unanswered, help us to find answer for this one
19. Which of the following are the chemical properties of good product material?
Answer
Correct Answer:
All of the mentione
Note: This Question is unanswered, help us to find answer for this one
20. Why sustainable manufacturing is required?
Answer
Correct Answer:
All of the mentioned
Note: This Question is unanswered, help us to find answer for this one
21. Why designs are periodically modified?
Answer
Correct Answer:
All of the mentione
Note: This Question is unanswered, help us to find answer for this one
22. On which of the following just in time manufacturing philosophy emphasizes?
Answer
Correct Answer:
Inventory
Note: This Question is unanswered, help us to find answer for this one
23. Which of the following software enables to implement custom applications or modify the system for specialized needs?
Answer
Correct Answer:
Programming software
Note: This Question is unanswered, help us to find answer for this one
24. Which of the following software performs the data entry, design, analysis, drafting, and manufacturing functions?
Answer
Correct Answer:
Application softwar
Note: This Question is unanswered, help us to find answer for this one
25. Which of the following device is mostly associated with automation?
Answer
Correct Answer:
Robots
Note: This Question is unanswered, help us to find answer for this one
26. What is the relationship between CAD/CAM?
Answer
Correct Answer:
Design and manufacturin
Note: This Question is unanswered, help us to find answer for this one
27. Which of the following software is used to provide the users with various functions to perform geometric modeling and construction?
Answer
Correct Answer:
Graphics software
Note: This Question is unanswered, help us to find answer for this one
28. Which of the following two disciplines are tied by a common database?
Answer
Correct Answer:
CAD and CAM
Note: This Question is unanswered, help us to find answer for this one
29. Utilization is a percentage or what?
Answer
Correct Answer:
KPI
Note: This Question is unanswered, help us to find answer for this one
30. Who does TPM work with to increase the efficiency of the equipment?
Answer
Correct Answer:
Machine operators
Note: This Question is unanswered, help us to find answer for this one
31. What is the goal of TPM?
Answer
Correct Answer:
Increase the efficiency of the equipment
Note: This Question is unanswered, help us to find answer for this one
32. What does TPM stand for?
Answer
Correct Answer:
Total Productive Maintenance
Note: This Question is unanswered, help us to find answer for this one
33. What type of study analyzes the manufacturing process to determine how long each step takes?
Answer
Correct Answer:
A time study
Note: This Question is unanswered, help us to find answer for this one
34. What is another name for a time study?
Answer
Correct Answer:
A time study analyzes every step of the manufacturing process
Note: This Question is unanswered, help us to find answer for this one
35. There is a formula used to calculate what?
Answer
Correct Answer:
Takt time
Note: This Question is unanswered, help us to find answer for this one
36. What sort of issues can be determined by SPC?
Answer
Correct Answer:
Production
Note: This Question is unanswered, help us to find answer for this one
37. What is the process used to monitor and control processes?
Answer
Correct Answer:
Statistical Process Control
Note: This Question is unanswered, help us to find answer for this one
38. What process control tool helps with monitoring and controlling processes?
Answer
Correct Answer:
Statistical Process Control Using
Note: This Question is unanswered, help us to find answer for this one
39. What is the name of the part of a manufacturing business that collects information from operators?
Answer
Correct Answer:
Part count
Note: This Question is unanswered, help us to find answer for this one
40. What does the term "percent" in "quality" mean?
Answer
Correct Answer:
This refers to the quality of the products currently being produced by a machine
Note: This Question is unanswered, help us to find answer for this one
41. What is Poka-Yoke a Japanese term meaning?
Answer
Correct Answer:
Mistake-proofing
Note: This Question is unanswered, help us to find answer for this one
42. What type of manufacturing process is Poka-Yoke used to help avoid making mistakes?
Answer
Correct Answer:
Lean
Note: This Question is unanswered, help us to find answer for this one
43. What is the Japanese term for mistake-proofing?
Answer
Correct Answer:
Poka-Yoke
Note: This Question is unanswered, help us to find answer for this one
44. What does a PLC do?
Answer
Correct Answer:
Automate processes of production
Note: This Question is unanswered, help us to find answer for this one
45. What sort of computer is a Programmable Logic Controller?
Answer
Correct Answer:
A computer that has been modified or programmed
Note: This Question is unanswered, help us to find answer for this one
46. What is the ideal cycle time that a manufacturing system should meet?
Answer
Correct Answer:
Schedule
Note: This Question is unanswered, help us to find answer for this one
47. What is a term for the actual cycle time versus the ideal cycle time?
Answer
Correct Answer:
Performance
Note: This Question is unanswered, help us to find answer for this one
48. What type of chart can be displayed in real-time with Mingo?
Answer
Correct Answer:
Pareto Chart
Note: This Question is unanswered, help us to find answer for this one
49. What percentage of consequences come from 20% of causes?
Answer
Correct Answer:
80%
Note: This Question is unanswered, help us to find answer for this one
50. What discipline can be applied to analyzing downtime?
Answer
Correct Answer:
Manufacturing
Note: This Question is unanswered, help us to find answer for this one
51. What is the name of the field that is concerned with the physical operation of machinery and equipment?
Answer
Correct Answer:
Operational Technology
Note: This Question is unanswered, help us to find answer for this one
52. Who uses Operational Technology ?
Answer
Correct Answer:
Hands on the factory floor
Note: This Question is unanswered, help us to find answer for this one
53. In the factory , what is the software tasked with changing?
Answer
Correct Answer:
Machine processes
Note: This Question is unanswered, help us to find answer for this one
54. What does OPC stand for?
Answer
Correct Answer:
Open Platform Communications
Note: This Question is unanswered, help us to find answer for this one
55. The OPC standards apply to what?
Answer
Correct Answer:
Industrial telecommunication
Note: This Question is unanswered, help us to find answer for this one
56. What is another name for Equipment Effectiveness?
Answer
Correct Answer:
OEE
Note: This Question is unanswered, help us to find answer for this one
57. What is the most well-known metric in the manufacturing industry?
Answer
Correct Answer:
Equipment Effectiveness
Note: This Question is unanswered, help us to find answer for this one
58. What does MTBF calculate?
Answer
Correct Answer:
The average time between failures
Note: This Question is unanswered, help us to find answer for this one
59. MTBF calculates the average time between what?
Answer
Correct Answer:
Failures
Note: This Question is unanswered, help us to find answer for this one
60. What is the MTBF for a machine or machinery?
Answer
Correct Answer:
Mean Time Between Failures
Note: This Question is unanswered, help us to find answer for this one
61. What is the acronym for Make to Stock?
Answer
Correct Answer:
MTS
Note: This Question is unanswered, help us to find answer for this one
62. What is a term for MTS?
Answer
Correct Answer:
Make to Stock
Note: This Question is unanswered, help us to find answer for this one
63. A custom piece of furniture or a custom car are both examples of what?
Answer
Correct Answer:
A made-to-order (MTO) product
Note: This Question is unanswered, help us to find answer for this one
64. What is not possible with an MTA strategy?
Answer
Correct Answer:
Full customization
Note: This Question is unanswered, help us to find answer for this one
65. There are a couple of different types of manufacturing production processes. A make to assemble strategy focuses on having what available?
Answer
Correct Answer:
Readily made parts
Note: This Question is unanswered, help us to find answer for this one
66. In a MTA strategy, parts are available in what stage of manufacturing?
Answer
Correct Answer:
Make
Note: This Question is unanswered, help us to find answer for this one
67. Industrial sector is experimenting with which new technology?
Answer
Correct Answer:
Industrial Internet of Things
Note: This Question is unanswered, help us to find answer for this one
68. Smart factories contain machinery and what else?
Answer
Correct Answer:
Analytics
Note: This Question is unanswered, help us to find answer for this one
69. What does GSI stand for?
Answer
Correct Answer:
Global infrastructure for the information society
Note: This Question is unanswered, help us to find answer for this one
70. What is a definition of IoT found in A-to-Z Guide to the Internet of Things?
Answer
Correct Answer:
The IoT links objects to the Internet
Note: This Question is unanswered, help us to find answer for this one
71. What is the name of the organization that describes a world where just about anything can be connected and communicate in an intelligent fashion?
Answer
Correct Answer:
IoT
Note: This Question is unanswered, help us to find answer for this one
72. What type of devices are used when referring to the internet of things?
Answer
Correct Answer:
Smart
Note: This Question is unanswered, help us to find answer for this one
73. What is the term used to describe a system of interrelated smart devices?
Answer
Correct Answer:
Internet of Things
Note: This Question is unanswered, help us to find answer for this one
74. What does HMI stand for?
Answer
Correct Answer:
Human-Machine Interface
Note: This Question is unanswered, help us to find answer for this one
75. What are finished goods in a manufacturing environment?
Answer
Correct Answer:
Products
Note: This Question is unanswered, help us to find answer for this one
76. In a manufacturing environment, what are the products that have completed all stages of production?
Answer
Correct Answer:
Finished goods
Note: This Question is unanswered, help us to find answer for this one
77. How much downtime is there in the industrial world?
Answer
Correct Answer:
This is the amount of time a plant or particular cell, line, or machine is down, or off-line
Note: This Question is unanswered, help us to find answer for this one
78. What is the amount of time a plant or particular cell or line is down, or off-line, and not producing any product?
Answer
Correct Answer:
Downtime
Note: This Question is unanswered, help us to find answer for this one
79. It is used by what systems for scheduling, purchasing, and production cost?
Answer
Correct Answer:
ERP and MES systems
Note: This Question is unanswered, help us to find answer for this one
80. What term is used in the manufacturing sector?
Answer
Correct Answer:
Cycle Time
Note: This Question is unanswered, help us to find answer for this one
81. For example, it is used by ERP and MES systems for what?
Answer
Correct Answer:
Scheduling, purchasing, and production cost
Note: This Question is unanswered, help us to find answer for this one
82. What type of product is affected by a CMM?
Answer
Correct Answer:
Metal
Note: This Question is unanswered, help us to find answer for this one
83. What tool ensures measurements are correct?
Answer
Correct Answer:
Coordinate-measuring Machine
Note: This Question is unanswered, help us to find answer for this one
84. What does the CMM ensure are correct?
Answer
Correct Answer:
Measurements
Note: This Question is unanswered, help us to find answer for this one
85. What does the term cell represent in cellular manufacturing?
Answer
Correct Answer:
Small increments
Note: This Question is unanswered, help us to find answer for this one
86. What is the term used when equipment is arranged in small increments?
Answer
Correct Answer:
Cellular manufacturing
Note: This Question is unanswered, help us to find answer for this one
87. What is the name of the document that contains all of the parts and materials needed to complete a product?
Answer
Correct Answer:
Bill of Materials
Note: This Question is unanswered, help us to find answer for this one
88. What is an example use of a bill of materials?
Answer
Correct Answer:
Manufacturing
Note: This Question is unanswered, help us to find answer for this one
89. A BOM includes all the materials and parts needed to complete what?
Answer
Correct Answer:
A particular product
Note: This Question is unanswered, help us to find answer for this one
90. A manufacturing analytics platform can determine the availability of a machine by collecting and calculating what?
Answer
Correct Answer:
Downtime
Note: This Question is unanswered, help us to find answer for this one
91. What does Wikipedia call an assembly line?
Answer
Correct Answer:
A manufacturing process
Note: This Question is unanswered, help us to find answer for this one
92. What are the five Japanese words in the theory's name?
Answer
Correct Answer:
Seiri (sort), seiton (set in order), seiso (shine), seiketsu (standardize), and shitsuke (sustain)
Note: This Question is unanswered, help us to find answer for this one
93. What does "shitsuke" mean?
Answer
Correct Answer:
Sustain
Note: This Question is unanswered, help us to find answer for this one
94. What type of customers experience is measured by VoC?
Answer
Correct Answer:
Experiences with the product
Note: This Question is unanswered, help us to find answer for this one
95. What is another name for the Voice of the Customer?
Answer
Correct Answer:
VoC
Note: This Question is unanswered, help us to find answer for this one
96. What term is used by marketing and commercialization teams to describe the overall feedback from customers?
Answer
Correct Answer:
Voice of the Customer
Note: This Question is unanswered, help us to find answer for this one
97. How is TEEP used to determine a production environment's potential?
Answer
Correct Answer:
Based on the performance level of its current equipment
Note: This Question is unanswered, help us to find answer for this one
98. What kind of performance is measured by the Total Effective Equipment Performance metric?
Answer
Correct Answer:
Production
Note: This Question is unanswered, help us to find answer for this one
99. What is another term for a statement of work?
Answer
Correct Answer:
SOW
Note: This Question is unanswered, help us to find answer for this one
100. What is the written record that documents and provides instruction for the steps included in a process or procedure?
Answer
Correct Answer:
Standard Operating Procedure
Note: This Question is unanswered, help us to find answer for this one
101. What is the Standard Operating Procedure document used for?
Answer
Correct Answer:
Increased efficiency and quality assurance
Note: This Question is unanswered, help us to find answer for this one
102. What is the name of the method used to reduce waste during the manufacturing cycle?
Answer
Correct Answer:
Single-minute exchange of die
Note: This Question is unanswered, help us to find answer for this one
