1. In a vibrating system, if the actual damping coefficient is 40 N/m/s and critical damping coefficient is 420 N/m/s, then logarithmic decrement is equal to
Answer
Correct Answer:
0.6
Note: This Question is unanswered, help us to find answer for this one
2. The tractive force in a locomotive with two cylinders is given by (where c = Fraction of reciprocating parts per cylinder, m = Mass of reciprocating parts, ω = Angular speed of crank, r = Radius of crank, and θ = Angle of inclination of crank to the line of stroke)
Answer
Correct Answer:
(1 - c)m.ω2.r(cos θ - sin θ)
Note: This Question is unanswered, help us to find answer for this one
3. The cam follower generally used in automobile engines is
Answer
Correct Answer:
Spherical faced follower
Note: This Question is unanswered, help us to find answer for this one
4. The maximum fluctuation of energy is the
Answer
Correct Answer:
Difference between the maximum and minimum energies
Note: This Question is unanswered, help us to find answer for this one
5. The pair is known as a higher pair, when the relative motion between the elements of a pair is
Answer
Correct Answer:
Partly turning and partly sliding
Note: This Question is unanswered, help us to find answer for this one
6. Which of the following is a turning pair?
Answer
Correct Answer:
Shaft with collars at both ends fitted into a circular hole
Note: This Question is unanswered, help us to find answer for this one
7. The static friction
Answer
Correct Answer:
All of these
Note: This Question is unanswered, help us to find answer for this one
8. When the two elements of a pair have a surface contact when relative motion takes place and the surface of one element slides over the surface of the other, the pair formed is known as a
Answer
Correct Answer:
Lower pair
Note: This Question is unanswered, help us to find answer for this one
9. Whitworth quick return motion mechanism consists of three turning pairs and one sliding pair.
Answer
Correct Answer:
Right
Note: This Question is unanswered, help us to find answer for this one
10. In a coupling rod of a locomotive, each of the four pairs is a __________ pair.
Answer
Correct Answer:
Turning
Note: This Question is unanswered, help us to find answer for this one
11. The factor which affects the critical speed of a shaft is
Answer
Correct Answer:
All of these
Note: This Question is unanswered, help us to find answer for this one
12. In order to give the primary balance of the reciprocating parts of a multi-cylinder in-line engines,
Answer
Correct Answer:
Both the algebraic sum of the primary forces must be equal to zero and the algebraic sum of the couples about any point in the plane of the primary forces must be equal to zero
Note: This Question is unanswered, help us to find answer for this one
13. The gears are termed as medium velocity gears, if their peripheral velocity is
Answer
Correct Answer:
3 - 15 m/s
Note: This Question is unanswered, help us to find answer for this one
14. An automobile steering gear is an example of
Answer
Correct Answer:
Lower pair
Note: This Question is unanswered, help us to find answer for this one
15. In order to balance the reciprocating masses,
Answer
Correct Answer:
Both primary forces and couples must be balanced and secondary forces and couples must be balanced
Note: This Question is unanswered, help us to find answer for this one
16. When the relation between the controlling force (Fc) and radius of rotation (r) for a spring controlled governor is Fc = ar + b, then the governor will be
Answer
Correct Answer:
Unstable
Note: This Question is unanswered, help us to find answer for this one
17. A disturbing mass m1 attached to the rotating shaft may be balanced by a single mass m2 attached in the same plane of rotation as that of m1, such that (where r1 and r2 are the radii of rotation of m1 and m2 respectively)
Answer
Correct Answer:
M1r1 = m2r2
Note: This Question is unanswered, help us to find answer for this one
18. A pair of friction discs is an example of rolling pair.
Answer
Correct Answer:
False
Note: This Question is unanswered, help us to find answer for this one
19. The acceleration of the particle moving with simple harmonic motion is inversely proportional to the displacement of the particle from the mean position.
Answer
Correct Answer:
No
Note: This Question is unanswered, help us to find answer for this one
20. The dynamic friction is the friction experienced by a body, when the body
Answer
Correct Answer:
Is in motion
Note: This Question is unanswered, help us to find answer for this one
