> > Mechanical Engineering MCQs > Automobile Engineering MCQs

Automobile Engineering MCQ

1. The function of an alternator in an automobile is to

Convert mechanical energy into electrical energy

Partly convert engine power into electric power

Supply electric power

Continually recharge the battery

Answer

Correct Answer: Continually recharge the battery

Note: This Question is unanswered, help us to find answer for this one

2. The diagram which shows the correct crank positions corresponding to the opening and closing of the valves, is known as

None of these

Indicator diagram

Axial force diagram

Valve timing diagram

Answer

Correct Answer: Valve timing diagram

Note: This Question is unanswered, help us to find answer for this one

3. The main function of intake manifold is that it

Promotes the mixture of air and fuel

Cools the intake air to a suitable temperature

Reduces intake noise

Distributes intake air equally to the cylinders

Answer

Correct Answer: Distributes intake air equally to the cylinders

Note: This Question is unanswered, help us to find answer for this one

4. A clutch is usually designed to transmit maximum torque which is

80 per cent of the maximum engine torque

None of these

150 per cent of the maximum engine torque

Equal to the maximum engine torque

Answer

Correct Answer: 150 per cent of the maximum engine torque

Note: This Question is unanswered, help us to find answer for this one

5. Which of the following symptom is caused as a result of brake disc run out?

Rapid wearing of the brake pads

Judder during braking

Ineffectiveness of the brakes

Localized wearing of the brake pads

Answer

Correct Answer: Judder during braking

Note: This Question is unanswered, help us to find answer for this one

6. If the engine coolant leaks into the engine oil, then engine oil

Appears milky

Turns black

None of these

Becomes foamy

Answer

Correct Answer: Appears milky

Note: This Question is unanswered, help us to find answer for this one

7. Positive camber is used to compensate for wheels tilting inward due to the weight of the vehicle.

Yes

Answer

Correct Answer: Yes

Note: This Question is unanswered, help us to find answer for this one

8. A baffle plate is fitted inside the oil pan to prevent the oil from splashing when it is subjected to vibration and other movement during vehicle operation.

False

True

Answer

Correct Answer: True

Note: This Question is unanswered, help us to find answer for this one

9. The flywheel and the pressure plate bind the clutch disc between them so that the engine and the transmission can be engaged.

Yes

Answer

Correct Answer: Yes

Note: This Question is unanswered, help us to find answer for this one

10. The natural gas is compressed in a CNG cylinder at a pressure of

250 bar

300 bar

220 bar

200 bar

Answer

Correct Answer: 200 bar

Note: This Question is unanswered, help us to find answer for this one

11. In a spark plug, when the temperature of the central electrode exceeds a certain temperature, any carbon that has adhered will be burnt off, and the temperature at which this burning off carbon starts is referred to as the self cleaning temperature.

Correct

Incorrect

Answer

Correct Answer: Correct

Note: This Question is unanswered, help us to find answer for this one

12. In a fuel injection system, the electronic control module (ECM) calculates the optimum fuel-injection volume for the engine condition based on the data received from the sensors, and injects this volume of fuel into the intake manifold at the optimum timing.

Correct

Incorrect

Answer

Correct Answer: Correct

Note: This Question is unanswered, help us to find answer for this one

13. The most commonly used supplementary restraint system (SRS) component is

Airbag

Steering

Brake

Seat belt

Answer

Correct Answer: Airbag

Note: This Question is unanswered, help us to find answer for this one

14. The coefficient of friction for the clutch facing is approximately

0.8

1.2

0.1

0.4

Answer

Correct Answer: 0.8

Note: This Question is unanswered, help us to find answer for this one

15. If the level of tension in the belt is too high, it can result in a loss of power or in bending of the rotating shaft or crankshaft.

Correct

Incorrect

Answer

Correct Answer: Correct

Note: This Question is unanswered, help us to find answer for this one

16. In automobiles G.V.W. refers to

Gross vehicle wheel track

Gross vehicle weight

Gross vehicle wheel base

Gross vehicle width

Answer

Correct Answer: Gross vehicle weight

Note: This Question is unanswered, help us to find answer for this one

17. The portion of a crankshaft which rests on cylinder block is called main journal.

Yes

Answer

Correct Answer: Yes

Note: This Question is unanswered, help us to find answer for this one

18. In a unit type body (frameless body) design, the sheet metal parts are welded together, forming a frame work to which outer skin is attached.

True

False

Answer

Correct Answer: True

Note: This Question is unanswered, help us to find answer for this one

19. The air gap between the central electrode and ground (or side) electrode of a spark plug is around

0.5 mm

1 mm

1.5 mm

0.2 mm

Answer

Correct Answer: 1 mm

Note: This Question is unanswered, help us to find answer for this one

20. In radial tyres

Inner tubes are always used

All plies run parallel to one another and vertical to tyre bead

One ply layer runs diagonally one way and another layer runs diagonally the other way

None of these

Answer

Correct Answer: All plies run parallel to one another and vertical to tyre bead

Note: This Question is unanswered, help us to find answer for this one

Mechanical Engineering MCQs | Topic-wise

MCQ on Automobile Engineering	MCQ on Compressors, Gas Dynamics and Gas Turbines
MCQ on Finite Element Method	MCQ on IC Engine (Internal combustion engine)
MCQ on IC Engines and Nuclear Power Plants	MCQ on Manufacturing Engineering (Mechanical Engineering)
MCQ on Refrigeration & Air Conditioning	MCQ on Strength of Materials
MCQ on Thermodynamics	MCQ on Workshop Technology
General Mechanical Engineering MCQs