Note: This Question is unanswered, help us to find answer for this one
2. A hydraulic pump that uses meshed gears that rotate and move what?
Answer
Correct Answer:
Liquid through a hydraulic system
Note: This Question is unanswered, help us to find answer for this one
3. A hydraulic pump that uses meshed gears that rotate and move liquid through a hydraulic system is called what?
Answer
Correct Answer:
GEAR PUMP
Note: This Question is unanswered, help us to find answer for this one
4. What is the name of the component that transmits power to another component when rotated?
Answer
Correct Answer:
GEAR
Note: This Question is unanswered, help us to find answer for this one
5. What is the abbreviation for gauge pressure?
Answer
Correct Answer:
Psig
Note: This Question is unanswered, help us to find answer for this one
6. What is the term used to state that any pressure stated is corrected for atmospheric pressure?
Answer
Correct Answer:
GAUGE PRESSURE
Note: This Question is unanswered, help us to find answer for this one
7. What is a device used for measuring, indicating or comparing?
Answer
Correct Answer:
GAUGE
Note: This Question is unanswered, help us to find answer for this one
8. What is a GATE VALVE?
Answer
Correct Answer:
A two-way hydraulic valve
Note: This Question is unanswered, help us to find answer for this one
9. What type of hydraulic component stores hydraulic fluid?
Answer
Correct Answer:
GAS-LOADED ACCUMULATOR
Note: This Question is unanswered, help us to find answer for this one
10. What type of lubrication is necessary to separate two surfaces?
Answer
Correct Answer:
FULL-FLUID-FILM LUBRICATION
Note: This Question is unanswered, help us to find answer for this one
11. What is present in FULL-FLUID-FILM LUBRICATION?
Answer
Correct Answer:
A continuous lubricating film
Note: This Question is unanswered, help us to find answer for this one
12. Full flow is a type of what?
Answer
Correct Answer:
Filter
Note: This Question is unanswered, help us to find answer for this one
13. A filter in which all the fluid must pass through the filter element is called what?
Answer
Correct Answer:
FULL FLOW
Note: This Question is unanswered, help us to find answer for this one
14. What type of exposed surface is used for piping connections?
Answer
Correct Answer:
Normally
Note: This Question is unanswered, help us to find answer for this one
15. What are piping connections on if they are on normally exposed surfaces of hydraulic components?
Answer
Correct Answer:
FRONT CONNECTED
Note: This Question is unanswered, help us to find answer for this one
16. What is the unit of time called that a given action occurs in?
Answer
Correct Answer:
FREQUENCY
Note: This Question is unanswered, help us to find answer for this one
17. What is the secondary spool called?
Answer
Correct Answer:
Larger spool
Note: This Question is unanswered, help us to find answer for this one
18. What type of valve features a solenoid to control the operating spool?
Answer
Correct Answer:
FOUR-WAY VALVE, SOLENOID & DIRECT OPERATED
Note: This Question is unanswered, help us to find answer for this one
19. How many ways can a valve be activated?
Answer
Correct Answer:
Four
Note: This Question is unanswered, help us to find answer for this one
20. How is a proportional valve actuated?
Answer
Correct Answer:
By a solenoid
Note: This Question is unanswered, help us to find answer for this one
21. Movement of the spool from the one extreme end to the other extreme end what?
Answer
Correct Answer:
Reverses the flow paths of the ports
Note: This Question is unanswered, help us to find answer for this one
22. What can be used to activate these valves?
Answer
Correct Answer:
MANUALLY
Note: This Question is unanswered, help us to find answer for this one
23. How many ports are in a four-way spool valve?
Answer
Correct Answer:
Five
Note: This Question is unanswered, help us to find answer for this one
24. What is a spool valve that allows the reversal of hydraulic flow?
Answer
Correct Answer:
A four-way spool valve
Note: This Question is unanswered, help us to find answer for this one
25. What term is used when a valve has four ports?
Answer
Correct Answer:
FOUR-WAY
Note: This Question is unanswered, help us to find answer for this one
26. What is an example of a system that has an exponential increase in available power?
Answer
Correct Answer:
Power transmission systems
Note: This Question is unanswered, help us to find answer for this one
27. What is the term for the exponential increase in available power usually associated with tools and power transmission systems?
Answer
Correct Answer:
Force Multiplication
Note: This Question is unanswered, help us to find answer for this one
28. What does the term "force" mean in a fluid power system?
Answer
Correct Answer:
The measure of the result of pressurized fluid acting upon a chamber
Note: This Question is unanswered, help us to find answer for this one
29. What is the most common unit used to state the force in pounds that will be available at the rod of a cylinder when acted upon by pressurized fluid from a fluid power system?
Answer
Correct Answer:
Pounds per square inch
Note: This Question is unanswered, help us to find answer for this one
30. What is the correct term for a fluid moving in layers?
Answer
Correct Answer:
Laminar
Note: This Question is unanswered, help us to find answer for this one
31. What is a flow situation in which fluid moves in parallel laminar layers?
Answer
Correct Answer:
FLOW, LAMINAR
Note: This Question is unanswered, help us to find answer for this one
32. What does hydraulic oil used in hazardous applications have to be resistant to?
Answer
Correct Answer:
FIRE-RESISTANT
Note: This Question is unanswered, help us to find answer for this one
33. Type of oil used for high temperature or hazardous applications?
Answer
Correct Answer:
Hydraulic oil
Note: This Question is unanswered, help us to find answer for this one
34. What is the unit of Fluid Velocity?
Answer
Correct Answer:
Length divided by time
Note: This Question is unanswered, help us to find answer for this one
35. What property of a fluid is not permanently changed?
Answer
Correct Answer:
FLUID STABILITY
Note: This Question is unanswered, help us to find answer for this one
36. What does fluid stability prevent from happening?
Answer
Correct Answer:
Permanent changes in properties
Note: This Question is unanswered, help us to find answer for this one
37. What type of pressure is used?
Answer
Correct Answer:
Fluid
Note: This Question is unanswered, help us to find answer for this one
38. What is a system of components that use a pressurized fluid to transfer energy?
Answer
Correct Answer:
FLUID POWER SYSTEM
Note: This Question is unanswered, help us to find answer for this one
39. Fluid power is used to transmit and control the flow of what?
Answer
Correct Answer:
Energy
Note: This Question is unanswered, help us to find answer for this one
40. What could be used to transmit energy through a pressurized fluid?
Answer
Correct Answer:
FLUID POWER
Note: This Question is unanswered, help us to find answer for this one
41. What kind of motor transforms the flow of pressurized fluid into rotary motion?
Answer
Correct Answer:
FLUID MOTOR
Note: This Question is unanswered, help us to find answer for this one
42. A fluid motor is a device that transforms the flow of fluid into what?
Answer
Correct Answer:
Rotary motion
Note: This Question is unanswered, help us to find answer for this one
43. What is resistance to flow from fluids measured in?
Answer
Correct Answer:
Psi
Note: This Question is unanswered, help us to find answer for this one
44. What causes fluid friction in a system?
Answer
Correct Answer:
Viscosity
Note: This Question is unanswered, help us to find answer for this one
45. What type of device indicates the volume of fluid passing through its interior passage?
Answer
Correct Answer:
FLOWMETER
Note: This Question is unanswered, help us to find answer for this one
46. What is a turbulent flow?
Answer
Correct Answer:
A flow situation in which fluid particles move in a random matter
Note: This Question is unanswered, help us to find answer for this one
47. In a turbulent flow, the particles move in what kind of a matter?
Answer
Correct Answer:
Random
Note: This Question is unanswered, help us to find answer for this one
48. What digital device opens or closes a contact when a pre-set flow passes over the sensing element?
Answer
Correct Answer:
FLOW SWITCH
Note: This Question is unanswered, help us to find answer for this one
49. What is the measurement in gallons per minute used to measure flow rate?
Answer
Correct Answer:
Gpm
Note: This Question is unanswered, help us to find answer for this one
50. What are used to divide the fluid in a passage?
Answer
Correct Answer:
FLOW DIVIDER
Note: This Question is unanswered, help us to find answer for this one
51. What is a FLOW DIVIDER used for?
Answer
Correct Answer:
To divide the fluid in a passage
Note: This Question is unanswered, help us to find answer for this one
52. What is a flow divider used to divide a fluid into?
Answer
Correct Answer:
Two or more separate fluid streams
Note: This Question is unanswered, help us to find answer for this one
53. What does flow demand measure?
Answer
Correct Answer:
The amount of fluid movement in a hydraulic system
Note: This Question is unanswered, help us to find answer for this one
54. What is the term for the amount of fluid movement in a hydraulic system that is required to perform a specific job or type of work?
Answer
Correct Answer:
Flow Demand
Note: This Question is unanswered, help us to find answer for this one
55. What are flow control valves used to regulate?
Answer
Correct Answer:
The flow of hydraulic fluid
Note: This Question is unanswered, help us to find answer for this one
56. What are FLOW CONTROL VALVEs used for?
Answer
Correct Answer:
Regulate the flow of hydraulic fluid
Note: This Question is unanswered, help us to find answer for this one
57. A check valve is placed in close proximity in a common body. This valve is called?
Answer
Correct Answer:
FLOW CONTROL VALVE
Note: This Question is unanswered, help us to find answer for this one
58. What does "lock-up" mean?
Answer
Correct Answer:
Check-off
Note: This Question is unanswered, help us to find answer for this one
59. What type of valve connects all ports to the tank?
Answer
Correct Answer:
Spool valve
Note: This Question is unanswered, help us to find answer for this one
60. What type of valve connects all of the ports to the tank port?
Answer
Correct Answer:
FLOAT SPOOL
Note: This Question is unanswered, help us to find answer for this one
61. What does a fitting close or connect to?
Answer
Correct Answer:
Fluid power lines and passages
Note: This Question is unanswered, help us to find answer for this one
62. What are connectors or closures for fluid power lines and passages?
Answer
Correct Answer:
FITTING
Note: This Question is unanswered, help us to find answer for this one
63. What is a FILLER CAP normally equipped with?
Answer
Correct Answer:
A fine screen
Note: This Question is unanswered, help us to find answer for this one
64. What device provides an access for filling?
Answer
Correct Answer:
FILLER CAP
Note: This Question is unanswered, help us to find answer for this one
65. Any closed circuit consisting of one or more forward elements and one or more feedback elements is called an what?
Answer
Correct Answer:
FEEDBACK LOOP
Note: This Question is unanswered, help us to find answer for this one
66. What does a closed loop system do to monitor feedback?
Answer
Correct Answer:
Part of a closed loop system which monitors back information
Note: This Question is unanswered, help us to find answer for this one
67. What can happen to a material when it suffers from fatigue?
Answer
Correct Answer:
Failure
Note: This Question is unanswered, help us to find answer for this one
68. What is the commonly used term for exhaust line?
Answer
Correct Answer:
A passage or channel that is open to the atmosphere
Note: This Question is unanswered, help us to find answer for this one
69. What are exhaust lines normally used in systems that may be dispensed into the atmosphere?
Answer
Correct Answer:
Systems using pressurized air or gases
Note: This Question is unanswered, help us to find answer for this one
70. A passage or channel that is open to the atmosphere is called what?
Answer
Correct Answer:
EXHAUST LINE
Note: This Question is unanswered, help us to find answer for this one
71. What is the degradation of a surface resulting from a mixture of fluid and air or fluid and dirt particles occurring?
Answer
Correct Answer:
EROSION
Note: This Question is unanswered, help us to find answer for this one
72. What prevents sliding metal surfaces from seizing?
Answer
Correct Answer:
Lubricant additive
Note: This Question is unanswered, help us to find answer for this one
73. What is the general appearance of a emulsion?
Answer
Correct Answer:
Milky or cloudy
Note: This Question is unanswered, help us to find answer for this one
74. What does the term emulsion mean?
Answer
Correct Answer:
Intimate mixture of oil and water
Note: This Question is unanswered, help us to find answer for this one
75. An additive that promotes the formation of a stable mixture, or what?
Answer
Correct Answer:
Emulsion
Note: This Question is unanswered, help us to find answer for this one
76. What type of additive promotes the formation of a stable mixture?
Answer
Correct Answer:
EmULSIFIER
Note: This Question is unanswered, help us to find answer for this one
77. What is the increase in length expressed as a percentage of the original length?
Answer
Correct Answer:
LONGATION
Note: This Question is unanswered, help us to find answer for this one
78. What term refers to the increase in length expressed as a percentage of the original length?
Answer
Correct Answer:
Elongation
Note: This Question is unanswered, help us to find answer for this one
79. What is a servo-valve capable of doing?
Answer
Correct Answer:
Continuously controlling hydraulic output as a function of an electrical input
Note: This Question is unanswered, help us to find answer for this one
80. In what way can a servo-valve control output as a function of input?
Answer
Correct Answer:
Continuously
Note: This Question is unanswered, help us to find answer for this one
81. What type of servo-valve is able to continuously control hydraulic output as a function of an electrical input?
Answer
Correct Answer:
ELECTRO-HYDRAULIC SERVO VALVE
Note: This Question is unanswered, help us to find answer for this one
82. What is the output of an electric motor measured in?
Answer
Correct Answer:
Horsepower
Note: This Question is unanswered, help us to find answer for this one
83. What are examples of elastomers?
Answer
Correct Answer:
Natural rubber or thermoplastic
Note: This Question is unanswered, help us to find answer for this one
84. What do you do to rubber when it gets too hot?
Answer
Correct Answer:
Soften
Note: This Question is unanswered, help us to find answer for this one
85. What is an example of an emission?
Answer
Correct Answer:
Gas
Note: This Question is unanswered, help us to find answer for this one
86. The escape, usually of gases, through a medium is called what?
Answer
Correct Answer:
EFFUSION
Note: This Question is unanswered, help us to find answer for this one
87. What is a pump's volumetric efficiency?
Answer
Correct Answer:
The actual output
Note: This Question is unanswered, help us to find answer for this one
88. How is the efficiency of a system usually expressed?
Answer
Correct Answer:
As a percentage
Note: This Question is unanswered, help us to find answer for this one
89. What is the ratio of a pump's output to its input?
Answer
Correct Answer:
EFFICIENCY
Note: This Question is unanswered, help us to find answer for this one
90. What protects the female body half when disconnected from the male tip half?
Answer
Correct Answer:
DUST PLUG
Note: This Question is unanswered, help us to find answer for this one
91. Xcludes what?
Answer
Correct Answer:
Contamination
Note: This Question is unanswered, help us to find answer for this one
92. What type of device protects the male tip half if disconnected?
Answer
Correct Answer:
DUST CAP
Note: This Question is unanswered, help us to find answer for this one
93. A measure of elastomer hardness by use of a what?
Answer
Correct Answer:
Durometer
Note: This Question is unanswered, help us to find answer for this one
94. What is a measure of elastomer hardness by use of a durometer?
Answer
Correct Answer:
DUROMETER HARDNESS
Note: This Question is unanswered, help us to find answer for this one
95. What component of a gear pump rotates the driving gear?
Answer
Correct Answer:
Driving mechanism
Note: This Question is unanswered, help us to find answer for this one
96. What is the name of the gear in a hydraulic gear pump that is rotated by the drive gear?
Answer
Correct Answer:
Driven gear
Note: This Question is unanswered, help us to find answer for this one
97. What is the name of the gear that is attached to the driving mechanism?
Answer
Correct Answer:
The drive gear
Note: This Question is unanswered, help us to find answer for this one
98. What is a condition that can be applied to a device to drift it?
Answer
Correct Answer:
Pre-set
Note: This Question is unanswered, help us to find answer for this one
99. What type of measurement does drift normally take?
Answer
Correct Answer:
Varying
Note: This Question is unanswered, help us to find answer for this one
100. What is another name for the manifold?
Answer
Correct Answer:
Vented
Note: This Question is unanswered, help us to find answer for this one
101. A passage in, or line from, a hydraulic component which returns leaked fluid to the reservoir or a vented manifold is called what?
Answer
Correct Answer:
DRAIN
Note: This Question is unanswered, help us to find answer for this one
102. Where does the passage beyond a device normally take place?
Answer
Correct Answer:
At the outlet
Note: This Question is unanswered, help us to find answer for this one
103. What allows one hand push-to-connect or pull-to-disconnect convenience?
Answer
Correct Answer:
Other nomenclature "two-way sleeve"
Note: This Question is unanswered, help us to find answer for this one
104. What allows one hand push-to-connect or pull-to-disconnect convenience when the quickaction coupling female half is clamp or bulkhead mounted and connected to a hose?
Answer
Correct Answer:
DOUBLE-ACTING SLEEVE
Note: This Question is unanswered, help us to find answer for this one
105. What is a DOUBLE-ACTING SLEEVE another term for?
Answer
Correct Answer:
Two-way sleeve
Note: This Question is unanswered, help us to find answer for this one
106. What type of cylinder can apply force and motion to the moveable element in both directions?
Answer
Correct Answer:
DOUBLE-ACTING CYLINDER
Note: This Question is unanswered, help us to find answer for this one
107. A cylinder can apply motion and what else to the element?
Answer
Correct Answer:
Force
Note: This Question is unanswered, help us to find answer for this one
108. How many hose assemblies are joined together by a common elbow?
Answer
Correct Answer:
Two
Note: This Question is unanswered, help us to find answer for this one
109. What can be the case of the amount of liquid transferred from the inlet of the hydraulic pump to the outlet in a single revolution?
Answer
Correct Answer:
Displacement can be fixed
Note: This Question is unanswered, help us to find answer for this one
110. What can be the case with displacement?
Answer
Correct Answer:
Variable
Note: This Question is unanswered, help us to find answer for this one
111. What does the term "dirt tolerance" mean?
Answer
Correct Answer:
Internal clearance
Note: This Question is unanswered, help us to find answer for this one
112. Discharge (Q) of a centrifugal pump is given by (where D = Diameter of impeller at inlet, b = Width of impeller at inlet, and Vf = Velocity of flow at inlet)
Answer
Correct Answer:
Q = π.D.b.Vf
Note: This Question is unanswered, help us to find answer for this one
113. The overall efficiency for a Pelton wheel lies between
Answer
Correct Answer:
0.85 to 0.90
Note: This Question is unanswered, help us to find answer for this one
114. Power required to drive a centrifugal pump is directly proportional to __________ of its impeller.
Answer
Correct Answer:
Fourth power of diameter
Note: This Question is unanswered, help us to find answer for this one
115. The static head of a centrifugal pump is equal to the __________ of suction head and delivery head.
Answer
Correct Answer:
SUM
Note: This Question is unanswered, help us to find answer for this one
116. A reciprocating pump is also called a __________ displacement pump.
Answer
Correct Answer:
Positive
Note: This Question is unanswered, help us to find answer for this one
117. The efficiency of a reaction turbine for a given head __________ with the increase in speed.
Answer
Correct Answer:
Decreases
Note: This Question is unanswered, help us to find answer for this one
118. For centrifugal pump impeller, the maximum value of the vane exit angle is
Answer
Correct Answer:
20° to 25°
Note: This Question is unanswered, help us to find answer for this one
119. In the casing of a centrifugal pump, the kinetic energy of the water is converted into pressure energy before the water leaves the casing.
Answer
Correct Answer:
True
Note: This Question is unanswered, help us to find answer for this one
120. A Francis turbine is used when the available head of water is
Answer
Correct Answer:
25 m to 250 m
Note: This Question is unanswered, help us to find answer for this one
121. Manometric head, in case of a centrifugal pump, is equal to
Answer
Correct Answer:
All of these
Note: This Question is unanswered, help us to find answer for this one
122. The speed of a turbine runner is
Answer
Correct Answer:
Directly proportional to H1/2
Note: This Question is unanswered, help us to find answer for this one
123. Slip of a reciprocating pump is negative, when
Answer
Correct Answer:
Suction pipe is long and delivery pipe is short and the pump is running at high speeds
Note: This Question is unanswered, help us to find answer for this one
124. Which of the following statement is wrong?
Answer
Correct Answer:
A Francis turbine is an impulse turbine.
Note: This Question is unanswered, help us to find answer for this one
125. In a reciprocating pump, air vessels are fitted to the suction pipe and delivery pipe close to the cylinder of the pump.
Answer
Correct Answer:
False
Note: This Question is unanswered, help us to find answer for this one
126. The maximum number of jets, generally, employed in an impulse turbine without jet interference are
Answer
Correct Answer:
Six
Note: This Question is unanswered, help us to find answer for this one
127. If the ratio of all the corresponding linear dimensions are equal, then the model and the prototype are said to have
Answer
Correct Answer:
Geometric similarity
Note: This Question is unanswered, help us to find answer for this one
128. The specific speed from 160 to 500 r.p.m. of a centrifugal pump indicates that the pump is
Answer
Correct Answer:
High speed with axial flow at outlet
Note: This Question is unanswered, help us to find answer for this one
129. When the speed of the pump increases, its net positive suction head (NPSH) requirement decreases.
Answer
Correct Answer:
Agree
Note: This Question is unanswered, help us to find answer for this one
130. A Pelton wheel develops 1750 kW under a head of 100 metres while running at 200 r.p.m. and discharging 2500 litres of water per second. The unit power of the wheel is
Answer
Correct Answer:
1.75 kW
Note: This Question is unanswered, help us to find answer for this one
131. In an impulse turbine, the jet of water impinges on the bucket with a low velocity and after flowing over the vanes, leaves with a high velocity.
Answer
Correct Answer:
False
Note: This Question is unanswered, help us to find answer for this one