Note: This Question is unanswered, help us to find answer for this one
2. What type of chain is not connected to the frame?
Answer
Correct Answer:
Floating link
Note: This Question is unanswered, help us to find answer for this one
3. In what way does a flexible link transmit motion?
Answer
Correct Answer:
Partly deformed
Note: This Question is unanswered, help us to find answer for this one
4. What is a link called that does not undergo any deformation while transmitting motion?
Answer
Correct Answer:
Rigid
Note: This Question is unanswered, help us to find answer for this one
5. What does a link called rigid not undergo while transmitting motion?
Answer
Correct Answer:
Deformation
Note: This Question is unanswered, help us to find answer for this one
6. What are the bodies that make up a link?
Answer
Correct Answer:
Resistant
Note: This Question is unanswered, help us to find answer for this one
7. What is the function of a Link?
Answer
Correct Answer:
Connecting other parts which have motion relative to it
Note: This Question is unanswered, help us to find answer for this one
8. What is the term for this type of part?
Answer
Correct Answer:
Element
Note: This Question is unanswered, help us to find answer for this one
9. What is the purpose of a machine?
Answer
Correct Answer:
Transforms energy available in one form or another to do the desired work
Note: This Question is unanswered, help us to find answer for this one
10. What does the machine transform?
Answer
Correct Answer:
Energy available in one form or another
Note: This Question is unanswered, help us to find answer for this one
11. What motion does the link have that makes it difficult to attach it to the ground?
Answer
Correct Answer:
Complex
Note: This Question is unanswered, help us to find answer for this one
12. What does the link not have?
Answer
Correct Answer:
Attached to ground
Note: This Question is unanswered, help us to find answer for this one
13. What type of rocking motion does a rocker have?
Answer
Correct Answer:
Oscillatory motion
Note: This Question is unanswered, help us to find answer for this one
14. What sort of motion does a rocke rhave when pivoted to the ground?
Answer
Correct Answer:
Oscillatory
Note: This Question is unanswered, help us to find answer for this one
15. If a crank is pivoted to ground, it makes what kind of revolutions?
Answer
Correct Answer:
Complete
Note: This Question is unanswered, help us to find answer for this one
16. What determines the length of a crank's stroke?
Answer
Correct Answer:
Ground
Note: This Question is unanswered, help us to find answer for this one
17. What is a ground?
Answer
Correct Answer:
Any link or links that are fixed, nonmoving with respect to the reference frame
Note: This Question is unanswered, help us to find answer for this one
18. What are links that are fixed, nonmoving with respect to the reference frame called?
Answer
Correct Answer:
Ground
Note: This Question is unanswered, help us to find answer for this one
19. What type of machine is designed to do work?
Answer
Correct Answer:
Mechanism
Note: This Question is unanswered, help us to find answer for this one
20. What does a machine do?
Answer
Correct Answer:
Work
Note: This Question is unanswered, help us to find answer for this one
21. What is the name of the chain's type?
Answer
Correct Answer:
Grounded kinematic Chain
Note: This Question is unanswered, help us to find answer for this one
22. What type of movement is the chain's movement?
Answer
Correct Answer:
Grounded kinematic
Note: This Question is unanswered, help us to find answer for this one
23. What is another term for a kinematic chain?
Answer
Correct Answer:
Links joined together for motion
Note: This Question is unanswered, help us to find answer for this one
24. What are some of the links that make up a kinematic chain?
Answer
Correct Answer:
Joined together for motion
Note: This Question is unanswered, help us to find answer for this one
25. What does the term "Joint order" refer to?
Answer
Correct Answer:
The number of links joined minus one
Note: This Question is unanswered, help us to find answer for this one
26. What does the term "force-closed joint" mean?
Answer
Correct Answer:
Requires some external force to keep the links together
Note: This Question is unanswered, help us to find answer for this one
27. What does a force-closed joint require?
Answer
Correct Answer:
Some external force to keep the links together
Note: This Question is unanswered, help us to find answer for this one
28. What is a form-closed joint?
Answer
Correct Answer:
One in which the links are kept together form
Note: This Question is unanswered, help us to find answer for this one
29. How many degrees of freedom does a half joint have?
Answer
Correct Answer:
Two
Note: This Question is unanswered, help us to find answer for this one
30. What are full joints called?
Answer
Correct Answer:
Lower pairs
Note: This Question is unanswered, help us to find answer for this one
31. What type of contact is in a lower pair?
Answer
Correct Answer:
Surface contact
Note: This Question is unanswered, help us to find answer for this one
32. What is a higher pair of contacts called?
Answer
Correct Answer:
Point or line contact
Note: This Question is unanswered, help us to find answer for this one
33. A connection between two or more links is called what?
Answer
Correct Answer:
A joint
Note: This Question is unanswered, help us to find answer for this one
34. What are joints called when they connect two or more links?
Answer
Correct Answer:
Kinematic pair
Note: This Question is unanswered, help us to find answer for this one
35. What kind of motion is a simultaneous combination of?
Answer
Correct Answer:
Rotation and translation
Note: This Question is unanswered, help us to find answer for this one
36. What is the motion that is a combination of rotation and translation?
Answer
Correct Answer:
Complex motion
Note: This Question is unanswered, help us to find answer for this one
37. What is a complex motion?
Answer
Correct Answer:
A simultaneous combination of rotation and translation
Note: This Question is unanswered, help us to find answer for this one
38. What type of path does the body describe in a pure translation?
Answer
Correct Answer:
Parallel
Note: This Question is unanswered, help us to find answer for this one
39. What does a body that has one point that does not move have?
Answer
Correct Answer:
Rotation
Note: This Question is unanswered, help us to find answer for this one
40. All other points move in what shape?
Answer
Correct Answer:
Circular arcs
Note: This Question is unanswered, help us to find answer for this one
41. Bicycle has a chain to provide what?
Answer
Correct Answer:
Torque
Note: This Question is unanswered, help us to find answer for this one
42. What is another simple example of a kinematic system that contains a chain drive to provide torque?
Answer
Correct Answer:
Bicycle
Note: This Question is unanswered, help us to find answer for this one
43. What is the term for a device that moves?
Answer
Correct Answer:
Machine
Note: This Question is unanswered, help us to find answer for this one
44. Machines that move contain what?
Answer
Correct Answer:
Kinematic elements
Note: This Question is unanswered, help us to find answer for this one
45. What do mechanisms typically provide in a machine?
Answer
Correct Answer:
Significant forces and transmit significant power
Note: This Question is unanswered, help us to find answer for this one
46. Machine: typically contains mechanisms that are designed to provide significant forces and transmit significant what?
Answer
Correct Answer:
Power
Note: This Question is unanswered, help us to find answer for this one
47. What is a mechanism?
Answer
Correct Answer:
A device that transforms motion to some desirable pattern
Note: This Question is unanswered, help us to find answer for this one
48. What type of device transforms motion to some desirable pattern?
Answer
Correct Answer:
Mechanism
Note: This Question is unanswered, help us to find answer for this one
49. The term "kinetics" refers to the study of what subject?
Answer
Correct Answer:
Forces on systems in motion
Note: This Question is unanswered, help us to find answer for this one
50. What is the study of forces on systems in motion?
Answer
Correct Answer:
Kinetics
Note: This Question is unanswered, help us to find answer for this one
51. What is kinematics the study of?
Answer
Correct Answer:
Position, displacement, rotation, speed, velocity, and acceleration
Note: This Question is unanswered, help us to find answer for this one
52. What is the study of position, displacement, rotation, speed, velocity, and acceleration?
Answer
Correct Answer:
Kinematics
Note: This Question is unanswered, help us to find answer for this one
53. Kinematics is the study of what?
Answer
Correct Answer:
Motion
Note: This Question is unanswered, help us to find answer for this one
54. What field is the study of motion without regard to forces?
Answer
Correct Answer:
Kinematics
Note: This Question is unanswered, help us to find answer for this one
55. Kinematics involves studying motion without regard to what?
Answer
Correct Answer:
Forces
Note: This Question is unanswered, help us to find answer for this one
56. A kinematic chain must have at least
Answer
Correct Answer:
Four links and four turning pairs
Note: This Question is unanswered, help us to find answer for this one
57. A cycle chain is a kinematic chain
Answer
Correct Answer:
No
Note: This Question is unanswered, help us to find answer for this one
58. A V belt designated as C 3048/120 will have
Answer
Correct Answer:
Approximately 120 inch inside length
Note: This Question is unanswered, help us to find answer for this one
59. The engine of an aeroplane rotates in a clockwise direction when seen from the tail end and the aeroplane takes a turn towards left. The effect of gyroscopic couple on aeroplane is
Answer
Correct Answer:
To raise the nose and dip the tail
Note: This Question is unanswered, help us to find answer for this one
60. A belt drive is
Answer
Correct Answer:
Not a positive drive
Note: This Question is unanswered, help us to find answer for this one
61. The type of governor used in record players for adjusting the speed of turntable generally is
Answer
Correct Answer:
Pickering governor
Note: This Question is unanswered, help us to find answer for this one
62. The moment of friction with the assumption of uniform wear to uniform pressure is
Answer
Correct Answer:
Lower
Note: This Question is unanswered, help us to find answer for this one
63. For speed reduction in the ratio of 100 the type of gear preferred is
Answer
Correct Answer:
Worm and worm wheel
Note: This Question is unanswered, help us to find answer for this one
64. Can simple band brake be made self-energising type
Answer
Correct Answer:
No
Note: This Question is unanswered, help us to find answer for this one
65. Klien's construction gives graphical construction for
Answer
Correct Answer:
Both of above
Note: This Question is unanswered, help us to find answer for this one
66. A governor is said to be stable when
Answer
Correct Answer:
There is one radius of the governor weights for each equilibrium speed
Note: This Question is unanswered, help us to find answer for this one
67. The maximum efficiency of a screw jack provided with square threads and angle of friction 30? will be
Answer
Correct Answer:
33%
Note: This Question is unanswered, help us to find answer for this one
68. Which of the following is a centrifugal type governor?
Answer
Correct Answer:
Hartnell governor
Note: This Question is unanswered, help us to find answer for this one
69. In Locomotive operation, the swaying couple results due to
Answer
Correct Answer:
Primary disturbing force
Note: This Question is unanswered, help us to find answer for this one
70. Hammer blow in locomotives results in
Answer
Correct Answer:
Tendency to lift wheel from rails
Note: This Question is unanswered, help us to find answer for this one
71. In case of gears, the module is
Answer
Correct Answer:
The length of the pitch circle diameter per tooth
Note: This Question is unanswered, help us to find answer for this one
72. The rotor of a ship rotates in anticlockwise direction when viewed from the bow end and the ship takes a left turn. The effect of gyroscopic couple on the ship is
Answer
Correct Answer:
To raise the bow and lower then stern
Note: This Question is unanswered, help us to find answer for this one
73. In case of involute gears
Answer
Correct Answer:
Pressure angle is constant throughout the teeth engagement
Note: This Question is unanswered, help us to find answer for this one
74. Which of the following oil has the highest specific gravity?
Answer
Correct Answer:
Castor oil
Note: This Question is unanswered, help us to find answer for this one
75. If a particle of a link has a velocity when changes both in magnitude and direction at any instant, then
Answer
Correct Answer:
It must have two components of acceleration e.g. centripetal, and tangential
Note: This Question is unanswered, help us to find answer for this one
76. The vibrations in which the restoring forces are not proportional to the displacements and the first power of velocity are known as
Answer
Correct Answer:
Bearing vibrations
Note: This Question is unanswered, help us to find answer for this one
77. Which of the following is a higher pair?
Answer
Correct Answer:
E. None of the above
Note: This Question is unanswered, help us to find answer for this one
78. In case of balancing problems pertaining to locomotives, the resultant unbalanced force is minimum when
Answer
Correct Answer:
Half of the reciprocating masses are balanced by rotating masses
Note: This Question is unanswered, help us to find answer for this one
79. If a machine uses four V belts, while purchasing care should be taken to ensure that
Answer
Correct Answer:
All above
Note: This Question is unanswered, help us to find answer for this one
80. A shaft having one end fixed has a disc oscillating freely at the other enIf the shaft stiffness, increases the natural frequency of vibrations will
Answer
Correct Answer:
Increase
Note: This Question is unanswered, help us to find answer for this one
81. The pulley in a belt drive acts as
Answer
Correct Answer:
Rolling pair
Note: This Question is unanswered, help us to find answer for this one
82. A dadial follower is
Answer
Correct Answer:
One in which the follower translates along an axis passing through the cam centre of rotation
Note: This Question is unanswered, help us to find answer for this one
83. In the elliptical trammel mechanism, the midpoint of the link connecting the two sliders traverses
Answer
Correct Answer:
A circular path
Note: This Question is unanswered, help us to find answer for this one
84. Klein's construction can be used when
Answer
Correct Answer:
E. (A) and (C) above
Note: This Question is unanswered, help us to find answer for this one
85. Dynamic of machines deals with
Answer
Correct Answer:
The forces acting on the parts of the machine
Note: This Question is unanswered, help us to find answer for this one
86. In case of spur gears the profile is
Answer
Correct Answer:
The curve forming face and flank
Note: This Question is unanswered, help us to find answer for this one
87. The spring constant k of a coil-spring is
Answer
Correct Answer:
E. directly proportional to the square of the number of coils in the spring
Note: This Question is unanswered, help us to find answer for this one
88. Coriorli's component of acceleration exists whenever a point moves along a path that has
Answer
Correct Answer:
Rotational motion
Note: This Question is unanswered, help us to find answer for this one
89. In case of hypoid gears the mutual position of shafts will be
Answer
Correct Answer:
Non-parallel, non-intersecting
Note: This Question is unanswered, help us to find answer for this one
90. Which of the following gears is free from axial thrust
Answer
Correct Answer:
Herringbone gears
Note: This Question is unanswered, help us to find answer for this one
91. The number of forks provided in a Hooke's joint is
Answer
Correct Answer:
Two
Note: This Question is unanswered, help us to find answer for this one
92. The mass moment of inertia is
Answer
Correct Answer:
The resistance to angular acceleration
Note: This Question is unanswered, help us to find answer for this one
93. Coriolis component is encountered in
Answer
Correct Answer:
Quick return mechanism
Note: This Question is unanswered, help us to find answer for this one
94. Pitch of gears is expressed by
Answer
Correct Answer:
Any of the above
Note: This Question is unanswered, help us to find answer for this one
95. In a cam and follower mechanism, for the uniform velocity of the followers the displacement curve will have
Answer
Correct Answer:
Constant slope
Note: This Question is unanswered, help us to find answer for this one
96. V-belts with E type cross-section are generally used in
Answer
Correct Answer:
Heavy duty machines
Note: This Question is unanswered, help us to find answer for this one
97. Identify the incorrect statement if any
Answer
Correct Answer:
In case of free vibrations the external force is applied at the ends only
Note: This Question is unanswered, help us to find answer for this one
98. Ackermann steering gear consists of
Answer
Correct Answer:
Turning pair
Note: This Question is unanswered, help us to find answer for this one
99. In case of cross-helical worm the axes of two shafts are
Answer
Correct Answer:
Non-parallel-non intersecting
Note: This Question is unanswered, help us to find answer for this one
100. A pulley in a belt-drive acts as a
Answer
Correct Answer:
Wrapping pair
Note: This Question is unanswered, help us to find answer for this one
101. A cylindrical type cam is one
Answer
Correct Answer:
With circumferential contour cut in the surface of the cylinder which rotates about its axis
Note: This Question is unanswered, help us to find answer for this one
102. The effect of creep in case of cross-belt drive is
Answer
Correct Answer:
To reduce the speed of the driven pulley and consequently reduce the power output
Note: This Question is unanswered, help us to find answer for this one
103. Slip in turning belt is
Answer
Correct Answer:
Zero
Note: This Question is unanswered, help us to find answer for this one
104. A reverted gear train is one is which
Answer
Correct Answer:
The first and last gear are on the same shaft
Note: This Question is unanswered, help us to find answer for this one
105. The advantages of involute profile over cycloidal are given below. Identify if there is any incorrect statement
Answer
Correct Answer:
The interference is inherently absent in this system
Note: This Question is unanswered, help us to find answer for this one
