1. What type of stress causes the member to be cut?
Answer
Correct Answer:
Direct Shear Stress
Note: This Question is unanswered, help us to find answer for this one
2. What is defined as the amount of strain resulting from applying a given stress?
Answer
Correct Answer:
Modulus of Elasticity
Note: This Question is unanswered, help us to find answer for this one
3. What does Young's Modulus measure?
Answer
Correct Answer:
Stiffness of an object
Note: This Question is unanswered, help us to find answer for this one
4. What does resistance to an external load mean?
Answer
Correct Answer:
Stress
Note: This Question is unanswered, help us to find answer for this one
5. What are the Shear stresses that act on opposing faces?
Answer
Correct Answer:
Stresses that act on parallel faces in opposing directions
Note: This Question is unanswered, help us to find answer for this one
6. What are Normal stresses?
Answer
Correct Answer:
Tensile and Compressive stresses
Note: This Question is unanswered, help us to find answer for this one
7. What is the point within a load carrying member that is subjected to the highest stress?
Answer
Correct Answer:
Stress element
Note: This Question is unanswered, help us to find answer for this one
8. The ratio of actual strength to required strength is called what?
Answer
Correct Answer:
Factor of safety
Note: This Question is unanswered, help us to find answer for this one
9. What property allows a structure to resist loads?
Answer
Correct Answer:
Strength
Note: This Question is unanswered, help us to find answer for this one
10. What is the maximum stress which can be applied to a material for an infinite number of stress cycles without failing the material?
Answer
Correct Answer:
Endurance Limit
Note: This Question is unanswered, help us to find answer for this one
11. When we use eigenvalue to find principal stress, what did it change?
Answer
Correct Answer:
Shape
Note: This Question is unanswered, help us to find answer for this one
12. What property of a shape is used to predict the resistance to shear stress?
Answer
Correct Answer:
Static Moment of area
Note: This Question is unanswered, help us to find answer for this one
13. Stress where a bending moment is applied to a beam without the simultaneous presence of axial, shear, or torsional forces is known as what?
Answer
Correct Answer:
Pure Bending
Note: This Question is unanswered, help us to find answer for this one
14. What is an engineering measure of the torque at which the entire cross section has yielded?
Answer
Correct Answer:
Plastic Torque
Note: This Question is unanswered, help us to find answer for this one
15. What term describes a load applied to a structural member at some point other than the centroid?
Answer
Correct Answer:
Eccentric loading
Note: This Question is unanswered, help us to find answer for this one
16. What are Principal Planes?
Answer
Correct Answer:
Planes that have no shear and are on oblique angles
Note: This Question is unanswered, help us to find answer for this one
17. What is a good measure of the energy stored at every point in an object?
Answer
Correct Answer:
Strain Energy Density
Note: This Question is unanswered, help us to find answer for this one
18. What type of energy is stored in the deformation of a body?
Answer
Correct Answer:
Strain Energy
Note: This Question is unanswered, help us to find answer for this one
19. What is the term for the distance between inflection points?
Answer
Correct Answer:
Effective Length
Note: This Question is unanswered, help us to find answer for this one
20. What do you call an imaginary point on a section where a shear force can be applied without inducing any torsion?
Answer
Correct Answer:
Shear Center
Note: This Question is unanswered, help us to find answer for this one
21. What term refers to the distribution of the shear stress throughout its cross-section due to the presence of traction-free surfaces?
Answer
Correct Answer:
Shear Flow
Note: This Question is unanswered, help us to find answer for this one
22. What happens when a structure fails under compressive stress that is below the yield compressive stresses that the material is capable of handling?
Answer
Correct Answer:
Buckling
Note: This Question is unanswered, help us to find answer for this one
23. What type of criteria predicts the onset of plastic deformation for a multiaxial state of stress?
Answer
Correct Answer:
Yield criteria
Note: This Question is unanswered, help us to find answer for this one
24. What is the name of the factor used to reduce a structure's failure?
Answer
Correct Answer:
Factor of Safety
Note: This Question is unanswered, help us to find answer for this one
25. What is the ratio of the ultimate load to the allowable load for a structure?
Answer
Correct Answer:
Factor of Safety
Note: This Question is unanswered, help us to find answer for this one
26. What is the ratio between the maximum stress to the applied tensile stress?
Answer
Correct Answer:
Stress Concentration Factor
Note: This Question is unanswered, help us to find answer for this one
27. A material in which properties are not a function of where within the material, they are constant throughout is called what?
Answer
Correct Answer:
Homogeneous
Note: This Question is unanswered, help us to find answer for this one
28. What is the term for a surface with no normal or shear stress component applied?
Answer
Correct Answer:
Traction Free Surface
Note: This Question is unanswered, help us to find answer for this one
29. The mean position of all the points in a coordinate direction is known as what?
Answer
Correct Answer:
Centroid
Note: This Question is unanswered, help us to find answer for this one
30. What is the name of the theorem that states that the moment of inertia about an axis passing through the centroid is equal to the moment of inertia about any parallel axis?
Answer
Correct Answer:
Parallel Axis Theorem
Note: This Question is unanswered, help us to find answer for this one
31. What is the stress in a material that experiences failure?
Answer
Correct Answer:
Fracture Strength
Note: This Question is unanswered, help us to find answer for this one
32. What is the maximum stress of a material in which necking begins?
Answer
Correct Answer:
Ultimate Strength
Note: This Question is unanswered, help us to find answer for this one
33. What is the term that is defined as the stress in which plastic deformation begins?
Answer
Correct Answer:
Yield Strength
Note: This Question is unanswered, help us to find answer for this one
34. What is the term used to describe the ability of a material to absorb energy and plastically deform without fracturing?
Answer
Correct Answer:
Toughness
Note: This Question is unanswered, help us to find answer for this one
35. Resilience can be calculated by finding the area under the what curve?
Answer
Correct Answer:
Stress-strain curve
Note: This Question is unanswered, help us to find answer for this one
36. What is the ability of an object to spring back into shape?
Answer
Correct Answer:
Resilience
Note: This Question is unanswered, help us to find answer for this one
37. What type of stress is isotropic stress that is given by the weight of water above a certain point?
Answer
Correct Answer:
Hydrostatic Stress
Note: This Question is unanswered, help us to find answer for this one
38. What is the basic principle of a principal direction?
Answer
Correct Answer:
A set of the axis where the normal stress vector is maximized
Note: This Question is unanswered, help us to find answer for this one
39. Where is the maximum stress a body can have?
Answer
Correct Answer:
Principle Stresses
Note: This Question is unanswered, help us to find answer for this one
40. What theory says that planes perpendicular to the long axis of a beam remain in plane and perpendicular during deformation?
Answer
Correct Answer:
Classical Beam Theory
Note: This Question is unanswered, help us to find answer for this one
41. What type of axis does a cross section have that doesn't have any longitudinal stresses or strains?
Answer
Correct Answer:
Neutral Axis
Note: This Question is unanswered, help us to find answer for this one
42. What is the zone where stress varies linearly with the strain?
Answer
Correct Answer:
Elastic Core
Note: This Question is unanswered, help us to find answer for this one
43. What is the term used to describe Stress that will present after all external loads are removed?
Answer
Correct Answer:
Residual Stress
Note: This Question is unanswered, help us to find answer for this one
44. What is the name of the correction applied when the yield stress is exceeded?
Answer
Correct Answer:
Stress Redistribution
Note: This Question is unanswered, help us to find answer for this one
45. According to Hooke's Law, what will increase with increasing strain?
Answer
Correct Answer:
Stress
Note: This Question is unanswered, help us to find answer for this one
46. What is defined as A deformation that causes irreversible damage to the material's original shape?
Answer
Correct Answer:
Plastic Deformation
Note: This Question is unanswered, help us to find answer for this one
47. A material that contains different properties in a different direction is referred to as what?
Answer
Correct Answer:
Anisotropic
Note: This Question is unanswered, help us to find answer for this one
48. A material that contains the same properties in any direction is referred to as what?
Answer
Correct Answer:
Isotropic
Note: This Question is unanswered, help us to find answer for this one
49. What is the definition of Linear Elastic?
Answer
Correct Answer:
When a load is applied, after unloading the material it will regain its original shape given enough time
Note: This Question is unanswered, help us to find answer for this one
50. What is the name of the structure's ability to resist deformation?
Answer
Correct Answer:
Bending Stiffness
Note: This Question is unanswered, help us to find answer for this one
51. What is the coefficient of thermal expansion used for?
Answer
Correct Answer:
Describes how the size of an object will change depending on its temperature
Note: This Question is unanswered, help us to find answer for this one
52. The ratio of shear stress over shear strain is called?
Answer
Correct Answer:
Shear Modulus
Note: This Question is unanswered, help us to find answer for this one
53. What do moments of inertia help explain?
Answer
Correct Answer:
A body's tendency to resist angular acceleration
Note: This Question is unanswered, help us to find answer for this one
54. What is the moment that is applied to a body that causes the material to twist?
Answer
Correct Answer:
Torque
Note: This Question is unanswered, help us to find answer for this one
55. What term refers to the point at which a material will begin to plastic deform?
Answer
Correct Answer:
Yield Stress
Note: This Question is unanswered, help us to find answer for this one
56. What is the property that measures a material's stiffness?
Answer
Correct Answer:
Modulus of Elasticity
Note: This Question is unanswered, help us to find answer for this one
57. What is a relative deformation measure parallel to the cross-sectional area?
Answer
Correct Answer:
Shear Strain
Note: This Question is unanswered, help us to find answer for this one
58. What is an example of normal strain?
Answer
Correct Answer:
Relative deformation perpendicular to the cross-sectional area
Note: This Question is unanswered, help us to find answer for this one
59. What is the component of engineering stress that is coplanar to cross sectional area?
Answer
Correct Answer:
Shear Stress
Note: This Question is unanswered, help us to find answer for this one
60. What type of stress occurs when an axial load is applied perpendicular to cross sectional area?
Answer
Correct Answer:
Normal Stress
Note: This Question is unanswered, help us to find answer for this one
