1. The Service Access Facility enables you to set up ttymon and listen port monitors by using:
Answer
Correct Answer:
the sacadm command
Note: This Question is unanswered, help us to find answer for this one
2. To determine whether a system has 32 bit or 64–bit capabilities enabled on x86 based systems, you use:
Answer
Correct Answer:
the isalist command
Note: This Question is unanswered, help us to find answer for this one
3. To list all users of each mounted UFS file system and the number of 1024-byte blocks used, you employ:
Answer
Correct Answer:
quot -a
Note: This Question is unanswered, help us to find answer for this one
4. To schedule single (one-time) system tasks, you use the following facility:
Answer
Correct Answer:
crontab
Note: This Question is unanswered, help us to find answer for this one
5. What does command ps print without option?
Answer
Correct Answer:
all jobs belong to the user
Note: This Question is unanswered, help us to find answer for this one
6. After the cron daemon executes an at job, the at job’s file:
Answer
Correct Answer:
is removed from the atjobs directory
Note: This Question is unanswered, help us to find answer for this one
7. Which of the following commands will output all the interfaces to a system?
Answer
Correct Answer:
netstat
Note: This Question is unanswered, help us to find answer for this one
8. You can change the locales on your system without reinstalling the OS or manually adding and removing packages, using the command:
Answer
Correct Answer:
localeadm
Note: This Question is unanswered, help us to find answer for this one
9. The equivalent of using the following three commands: smpatch analyze, smpatch download, and smpatch add, is to use the command:
Answer
Correct Answer:
smpatch update
Note: This Question is unanswered, help us to find answer for this one
10. Which of the following Solaris 10 commands can be used to create a permanent alias?
Answer
Correct Answer:
echo
Note: This Question is unanswered, help us to find answer for this one
11. Which is not a tunable parameter in Solaris?
Answer
Correct Answer:
Range Configuration
Note: This Question is unanswered, help us to find answer for this one
12. If you want to get a list of all software packages installed on the system you use:
Answer
Correct Answer:
pkginfo
Note: This Question is unanswered, help us to find answer for this one
13. To verify that a printer's banner page is optional on printer printer-name, you should look for the output line "Banner not required" in response to:
Answer
Correct Answer:
lpstat -p printer-name -l
Note: This Question is unanswered, help us to find answer for this one
14. In order to use the 'smpatch add' command, your system should be in:
Answer
Correct Answer:
single-user mode
Note: This Question is unanswered, help us to find answer for this one
15. Instead of using the pprosetup and pprosvc commands, it is better to use the command:
Answer
Correct Answer:
smpatch
Note: This Question is unanswered, help us to find answer for this one
16. When applying patches with Patch Manager, you
Answer
Correct Answer:
Need to set up the keystore and certificates manually
Note: This Question is unanswered, help us to find answer for this one
17. For a service called SSS, to inspect its properties you do:
Answer
Correct Answer:
inetadm -l SSS
Note: This Question is unanswered, help us to find answer for this one
18. Which of the following Solaris 10 commands can be used to create an alias temporarily?
Answer
Correct Answer:
ifconfig
Note: This Question is unanswered, help us to find answer for this one
19. Which of the following is not a function of the harness (VTSK) in VTS' agent layer?
Answer
Correct Answer:
Encryption of messages.
Note: This Question is unanswered, help us to find answer for this one
20. On a SPARC system, if you want to create a crash (core) dump, you do:
Answer
Correct Answer:
halt -d
Note: This Question is unanswered, help us to find answer for this one
21. Which of the following Solaris 10 command will list all open TCP connections?
Answer
Correct Answer:
netstat -f inet
Note: This Question is unanswered, help us to find answer for this one
22. By default, the package keystore of a signed packages that is used with pkgadd and patchadd, is stored at:
Answer
Correct Answer:
/var/sadm/security
Note: This Question is unanswered, help us to find answer for this one
23. To install a package non-interactively, by default you can set an response file to the 'pkgadd -a' command in:
Answer
Correct Answer:
/var/sadm/install/admin
Note: This Question is unanswered, help us to find answer for this one
24. On an inittab File the line starts with 'p3:', if the third field is 'respawn' it means that:
Answer
Correct Answer:
The process indicated on the last field is started, and restarted when it dies
Note: This Question is unanswered, help us to find answer for this one
25. To set the hard and soft limits on the number of inodes and the amount of disk space for each user, you use:
Answer
Correct Answer:
edquota
Note: This Question is unanswered, help us to find answer for this one
26. Which of the following is an INVALID control for password management in Solaris 10
Answer
Correct Answer:
PWDPOLICY
Note: This Question is unanswered, help us to find answer for this one
27. Which of the following shell is a superset of the Bourne shell with C shell-likeenhancements and additional feature?
Answer
Correct Answer:
Korn
Note: This Question is unanswered, help us to find answer for this one
28. To remove a software package you use the command:
Answer
Correct Answer:
pkgrm
Note: This Question is unanswered, help us to find answer for this one
29. If you are at the PROM level (you pressed stop-A and got to the ok prompt), and you want to get to run level 3 (without a reboot), you use the command:
Answer
Correct Answer:
boot
Note: This Question is unanswered, help us to find answer for this one
30. Which of the following is TRUE about ROOT USER?
Answer
Correct Answer:
User ID=0, Group ID=1
Note: This Question is unanswered, help us to find answer for this one
31. If you want to view information on the certificate you have stored in the package keystore, you use the command:
Answer
Correct Answer:
pkgadm listcert
Note: This Question is unanswered, help us to find answer for this one
32. What is the outpout of svcs command?
Answer
Correct Answer:
List all active services
Note: This Question is unanswered, help us to find answer for this one
33. Which of the followiing commands can be used to change the priority of a process?
Answer
Correct Answer:
nice
Note: This Question is unanswered, help us to find answer for this one
34. If users want to perform drag-and-drop operations, what must be true about the source and target label?
Answer
Correct Answer:
They must be the same.
Note: This Question is unanswered, help us to find answer for this one
35. Which of the folllwing files contain user passwords?
Answer
Correct Answer:
Both /etc/passwd and /etc/shadow
Note: This Question is unanswered, help us to find answer for this one
36. How do you list all of the zones that are configured on a system?
Answer
Correct Answer:
zoneadm list -c
Note: This Question is unanswered, help us to find answer for this one
37. Because the command, “mpathadm modify” is only effective while the system is running, what must be updated to retain changes that are made after a shutdown?
Answer
Correct Answer:
/kernel/drv/scsi_vhci.conf
Note: This Question is unanswered, help us to find answer for this one
38. If you are at the PROM level (you pressed stop-A and got to the ok prompt), and you want to check the revision number, you use the command:
Answer
Correct Answer:
banner
Note: This Question is unanswered, help us to find answer for this one
39. What must happen before logging into the system?
Answer
Correct Answer:
A default project must be assigned to the user.
Note: This Question is unanswered, help us to find answer for this one
40. To check the status of active processes on a system, you use:
Answer
Correct Answer:
all are correct
Note: This Question is unanswered, help us to find answer for this one
41. Where are the details displayed by the ls -l command stored?
Answer
Correct Answer:
The inode for the file. (*)
Note: This Question is unanswered, help us to find answer for this one
42. Which of the following directories contain kernel?
Answer
Correct Answer:
/, /usr and /platform
Note: This Question is unanswered, help us to find answer for this one
43. What is Oracle VTS?
Answer
Correct Answer:
It is an Oracle validation test for hardware diagnostics.
Note: This Question is unanswered, help us to find answer for this one
44. What does system mount option (Solaris 10) nodevices signify?
Answer
Correct Answer:
To disallow the opening of device-special files
Note: This Question is unanswered, help us to find answer for this one
45. Which of the following command will delete the password for user "test" and prompt for a new password on login?
Answer
Correct Answer:
passwd -df test
Note: This Question is unanswered, help us to find answer for this one
46. To display the total number of blocks that are contained in a directory, you use:
Answer
Correct Answer:
du -s
Note: This Question is unanswered, help us to find answer for this one
47. Once you installed a software package, you can check if the installation is correct with:
Answer
Correct Answer:
pkgchk -v
Note: This Question is unanswered, help us to find answer for this one
48. What system resource call specifies the total number of files that can be assigned by the open(2) system call?
Answer
Correct Answer:
process.max-file-descriptor
Note: This Question is unanswered, help us to find answer for this one
49. Which of the following is a user profile for a user with Bourne shell as a default shell?
Answer
Correct Answer:
.profile
Note: This Question is unanswered, help us to find answer for this one
50. Crash dump files are created in the directory:
Answer
Correct Answer:
/var/crash/
Note: This Question is unanswered, help us to find answer for this one
51. Which of the following is TRUE for files /etc/hosts.equiv and $HOME/.rhosts?
Answer
Correct Answer:
Thery are related to system security
Note: This Question is unanswered, help us to find answer for this one
52. What directories are included in the root path?
Note: This Question is unanswered, help us to find answer for this one
53. To remove a crontab file, you use the command:
Answer
Correct Answer:
crontab -r
Note: This Question is unanswered, help us to find answer for this one
54. How can you get the WWN info about the HBA ports in a system under Solaris 10?
Answer
Correct Answer:
fcinfo hba-port
Note: This Question is unanswered, help us to find answer for this one
55. To remove entire temporary directories, you cd to the temp directories, then use the following command:
Answer
Correct Answer:
rm -r *
Note: This Question is unanswered, help us to find answer for this one
56. On a newly installed Solaris system, the script /sbin/rc4 performs the following actions contained in the scripts in /etc/rc4.d:
Answer
Correct Answer:
None are correct
Note: This Question is unanswered, help us to find answer for this one
57. The tnd daemon pulls tnrhdb and tnrhtp information from the LDAP directory and local files. What governs the order that they are loaded?
Answer
Correct Answer:
Their order in the nsswitch.conf file.
Note: This Question is unanswered, help us to find answer for this one
58. If '-1 < N < 7', Scripts in /etc/rcN.d are executed in:
Answer
Correct Answer:
ASCII order of their names
Note: This Question is unanswered, help us to find answer for this one
59. Which of the following is a default shell for root user?
Answer
Correct Answer:
bourne
Note: This Question is unanswered, help us to find answer for this one
60. If you are at the PROM level (you pressed stop-A and got to the ok prompt), and you want to start the system from the Solaris DVD-ROM disk, you use the command:
Answer
Correct Answer:
boot cdrom -s
Note: This Question is unanswered, help us to find answer for this one
61. If you need to shut down Solaris in 30 seconds for an installation, what is the command?
Answer
Correct Answer:
-g30
Note: This Question is unanswered, help us to find answer for this one
62. Which of the following command can be used to stop a running service?
Answer
Correct Answer:
svcadm disable name_of_service
Note: This Question is unanswered, help us to find answer for this one
63. When tuning Solaris, does one system's /etc/system settings govern another systems environment?
Answer
Correct Answer:
No.
Note: This Question is unanswered, help us to find answer for this one
64. To create a soft partition, what parameters are needed with the metainit command?
Note: This Question is unanswered, help us to find answer for this one
65. To apply patches to a machine, you use:
Answer
Correct Answer:
All are correct
Note: This Question is unanswered, help us to find answer for this one
66. You have been assigned the task of interpreting VTS probe errors. Where do you find them?
Answer
Correct Answer:
/var/sunvts/logs/vtsk.err
Note: This Question is unanswered, help us to find answer for this one
67. If an adjustment in the /etc/system file has rendered your system unbootable, what command would you use to recover?
Answer
Correct Answer:
ok boot -a
Note: This Question is unanswered, help us to find answer for this one
68. When setting up a volume in VTS, what data storage scheme does VTS use?
Answer
Correct Answer:
RAID
Note: This Question is unanswered, help us to find answer for this one
69. Which of the following Solaris 10 command scan for new devices?
Answer
Correct Answer:
devfsadm
Note: This Question is unanswered, help us to find answer for this one
70. Which of the following is TRUE about following command and the option: useradd -u 800 -g TEST
Answer
Correct Answer:
UID number for the new user : 800 Primary group for the new user : TEST
Note: This Question is unanswered, help us to find answer for this one
71. What is the name of the daemon that handles FTP transfers?
Answer
Correct Answer:
in.ftpd
Note: This Question is unanswered, help us to find answer for this one
72. To set up a terminal, you use:
Answer
Correct Answer:
the Solaris Management Console
Note: This Question is unanswered, help us to find answer for this one
73. Though the traditional UNIX crypt algorithm is insufficient for current systems, why is it still utilized?
Answer
Correct Answer:
For the sake of backwards compatibility.
Note: This Question is unanswered, help us to find answer for this one
74. When exporting a ZFS storage pool, what effect does the “zpool export tank” command have, and what can be done in the event of a failure?
Answer
Correct Answer:
“zpool export tank” attempts to unmount any mounted file system. The -f option is used to forcefully unmount file systems in the event of a failure.
Note: This Question is unanswered, help us to find answer for this one
75. To list the total number of physical processors on a system, you use:
Answer
Correct Answer:
psrinfo -p
Note: This Question is unanswered, help us to find answer for this one
76. What is location that your project database definition would be stored?
Answer
Correct Answer:
/etc/nsswitch.conf
Note: This Question is unanswered, help us to find answer for this one
77. If you add a user to a group while they are already logged on, what do they have to do in order to be able to access files owned by that group?
Answer
Correct Answer:
Log out of the shell and back in.
Note: This Question is unanswered, help us to find answer for this one
78. What is the default difference between run levels 2 and 3?
Answer
Correct Answer:
Run level 3 starts NFS services
Note: This Question is unanswered, help us to find answer for this one
79. The International Organization for Standardization designed the OSI Reference Model that uses structured layers. What does the acronym OSI mean?
Answer
Correct Answer:
Open Systems Interconnection
Note: This Question is unanswered, help us to find answer for this one
80. To automatically execute system tasks, you use:
Answer
Correct Answer:
all are correct
Note: This Question is unanswered, help us to find answer for this one
81. Which of the following command can be used to see the detailed boot sequence?
Answer
Correct Answer:
boot -m verbose
Note: This Question is unanswered, help us to find answer for this one
82. Which of the following command can be used to add new user accounts to the local system?
Answer
Correct Answer:
useradd
Note: This Question is unanswered, help us to find answer for this one
83. Do you have to be a super user to install a device to your Solaris system?
Answer
Correct Answer:
Yes.
Note: This Question is unanswered, help us to find answer for this one
84. Which of the following Solaris 10 command will list all configurable hardware in the system?
Answer
Correct Answer:
cfgadm
Note: This Question is unanswered, help us to find answer for this one
85. Solaris is what kind of operating system?
Answer
Correct Answer:
Unix
Note: This Question is unanswered, help us to find answer for this one
86. The '-g' switch to the shutdown command is followed by:
Answer
Correct Answer:
grace time in seconds
Note: This Question is unanswered, help us to find answer for this one
87. To display a system’s Host ID number you use:
Answer
Correct Answer:
the hostid command
Note: This Question is unanswered, help us to find answer for this one
88. Which of the following is NOT a valid output for command : echo $SHELL
Answer
Correct Answer:
/bin/tch
Note: This Question is unanswered, help us to find answer for this one
89. If you are on a stand alone system, and you want to bring it to single user mode, you execute:
Answer
Correct Answer:
init s
Note: This Question is unanswered, help us to find answer for this one
90. Which of the following commands can be used to capture network packets?
Answer
Correct Answer:
snoop
Note: This Question is unanswered, help us to find answer for this one
91. Which of the following field in /etc/passwd represents user primary group?
Answer
Correct Answer:
GID
Note: This Question is unanswered, help us to find answer for this one
92. To display the size of one or more directories, subdirectories, and files, you use:
Answer
Correct Answer:
the du command
Note: This Question is unanswered, help us to find answer for this one
93. Which of the following command will output the default shell for the current user ?
Answer
Correct Answer:
echo $SHELL
Note: This Question is unanswered, help us to find answer for this one
94. To view the system's Solaris Release Information you:
Answer
Correct Answer:
display the contents of the /etc/release file
Note: This Question is unanswered, help us to find answer for this one
95. What is the difference between RAID-0 (Concatenation), and RAID-0 (Stripe) Volumes?
Answer
Correct Answer:
Concatenated RAID-0 writes to the first available component, while Stripe distributes the data equally across all components.
Note: This Question is unanswered, help us to find answer for this one
96. Which manages all the physical resources of the computer?
Answer
Correct Answer:
Kernel
Note: This Question is unanswered, help us to find answer for this one
97. What is a UNIX File System (UFS) ACL, and what does it do?
Answer
Correct Answer:
Access Control Lists restrict or grant read, write, or execute access to specific users or groups.
Note: This Question is unanswered, help us to find answer for this one
98. What command is used to configure Solaris' multipathing support?
Answer
Correct Answer:
mpathadm
Note: This Question is unanswered, help us to find answer for this one
99. You suspect an unauthorized use of the “su” command. Where do you look and what would it tell you?
Answer
Correct Answer:
“/var/adm/sulog”, and it tells you every use of the “su” command.
Note: This Question is unanswered, help us to find answer for this one
100. What is the outpout of svcs -d name_of_service command?
Answer
Correct Answer:
List all the services this service is depended upon
Note: This Question is unanswered, help us to find answer for this one
101. When installing a non-hot-pluggable device, what must you do before installation?
Answer
Correct Answer:
Shut down the system.
Note: This Question is unanswered, help us to find answer for this one
102. How to check filesystem damage?
Answer
Correct Answer:
fsck
Note: This Question is unanswered, help us to find answer for this one
103. What can be called discrete rights to processes that perform operations?
Answer
Correct Answer:
Privelages
Note: This Question is unanswered, help us to find answer for this one
104. Which of the following are main components of SunOS operating system?
Answer
Correct Answer:
Kernel, Shell and Directory Hierarchy
Note: This Question is unanswered, help us to find answer for this one
105. Which of the following is TRUE about /bin/ksh ?
Answer
Correct Answer:
Indicates the Korn shell
Note: This Question is unanswered, help us to find answer for this one
106. What is an example of a protocol used on Solaris' network layer?
Answer
Correct Answer:
IPv4
Note: This Question is unanswered, help us to find answer for this one
107. What is ZFS?
Answer
Correct Answer:
A file system used by Solaris.
Note: This Question is unanswered, help us to find answer for this one
108. Is it possible to log in via serial port?
Answer
Correct Answer:
Yes.
Note: This Question is unanswered, help us to find answer for this one
109. For managing terminals and modems, you use:
Answer
Correct Answer:
Both
Note: This Question is unanswered, help us to find answer for this one
110. Which of the following commands can be used to ping a host?
Answer
Correct Answer:
ping
Note: This Question is unanswered, help us to find answer for this one
111. In the context of Solaris, what are SAN devices?
Answer
Correct Answer:
Storage area network devices are storage devices in a high-speed network that are also connected to servers.
Note: This Question is unanswered, help us to find answer for this one
112. You need to prevent the new staff from performing “console aborts”. How do you do this?
Answer
Correct Answer:
Change the value of KEYBOARD_ABORT to “disable” in the /etc/default/kbd file.
Note: This Question is unanswered, help us to find answer for this one
113. To add a new attached printer you use:
Answer
Correct Answer:
Both Solaris Print Manager and LP print service commands
Note: This Question is unanswered, help us to find answer for this one
114. The following crontab file (besides root) is stored in the /var/spool/cron/crontabs directory:
Answer
Correct Answer:
all are correct
Note: This Question is unanswered, help us to find answer for this one
115. Within the Solaris Operating System, what are authentication services used for?
Answer
Correct Answer:
Secure identification of users via password, or other forms of identification.
Note: This Question is unanswered, help us to find answer for this one
116. What are the benefits of NFS?
Answer
Correct Answer:
All of the given options are valid benefits
Note: This Question is unanswered, help us to find answer for this one
117. Within the Solaris Operating System, what is the first line of defense to protect the file system?
Answer
Correct Answer:
Default UNIX permissions assigned to every file system object.
Note: This Question is unanswered, help us to find answer for this one
118. To find only those files larger than 400 blocks in the current working directory, you use:
Answer
Correct Answer:
find . -size +400 -print
Note: This Question is unanswered, help us to find answer for this one
119. What is a good simple rule to enforce with new users within the Trusted Extension System?
Answer
Correct Answer:
Keep your password private.
Note: This Question is unanswered, help us to find answer for this one
120. What is the difference between ARC and L2ARC?
Answer
Correct Answer:
ARC is the primary cache, and L2ARC is the secondary cache.
Note: This Question is unanswered, help us to find answer for this one
121. Which of the following act as an interface between the user and the kernel?
Answer
Correct Answer:
Shell
Note: This Question is unanswered, help us to find answer for this one
122. Solaris 10 OS stores user account and group entry information in the which of following system files?
Note: This Question is unanswered, help us to find answer for this one
123. Which command allows you to update your current password?
Answer
Correct Answer:
passwd (*)
Note: This Question is unanswered, help us to find answer for this one
124. You can use Patch Manager to perform the following on your system:
Answer
Correct Answer:
All are correct
Note: This Question is unanswered, help us to find answer for this one
125. To verify that a certificate was not altered en route, you use the fingerprint (digest):
Answer
Correct Answer:
All are correct
Note: This Question is unanswered, help us to find answer for this one
126. Under the Solaris Operating System, are double-quotes, left single-quotes and right single-quotes interchangable?
Answer
Correct Answer:
No. Command syntax must be exact.
Note: This Question is unanswered, help us to find answer for this one
127. What is an example of an encrypted authentication service within Solaris?
Answer
Correct Answer:
Kerberos
Note: This Question is unanswered, help us to find answer for this one
128. What will auditing tell you about a Solaris system's security?
Answer
Correct Answer:
It will tell you about changes made to the system.
Note: This Question is unanswered, help us to find answer for this one
129. Which of the following commands can be used for remote copying?
Answer
Correct Answer:
rcp
Note: This Question is unanswered, help us to find answer for this one
130. What command would you use to restart the SSH server daemon on Solaris 10 using the Service Management Framework (SMF)?
Answer
Correct Answer:
svcadm restart ssh
Note: This Question is unanswered, help us to find answer for this one
131. When using the ls command to display size of files, you display file sizes and directory sizes in Kbytes, Mbytes, Gbytes, or Tbytes (when the file or directory size is larger than 1024 bytes) using:
Answer
Correct Answer:
-h
Note: This Question is unanswered, help us to find answer for this one
