Note: This Question is unanswered, help us to find answer for this one
21. Users who access a web server are usually restricted to the ____ directory.
Answer
Correct Answer:
Root
Note: This Question is unanswered, help us to find answer for this one
22. When your rearview mirror is set to its night setting, it may hamper your ability to_________.
Answer
Correct Answer:
Judge the distance of traffic behind you
Note: This Question is unanswered, help us to find answer for this one
23. When exiting the expressway, signal your intention to exit approximately _____mile before you exit.
Answer
Correct Answer:
1/2
Note: This Question is unanswered, help us to find answer for this one
24. What is the value of the ratio of compressive strength of concrete to its tensile strength?
Answer
Correct Answer:
10
Note: This Question is unanswered, help us to find answer for this one
25. Which factor among the following is used to determine the workability of concrete?
Answer
Correct Answer:
actual weight of sample / theoretical weight of sample
Note: This Question is unanswered, help us to find answer for this one
26. ____________ is the value of sensitivity of a rigid module.
Answer
Correct Answer:
0.25
Note: This Question is unanswered, help us to find answer for this one
27. Which among the following methods is used to solve three-point problem?
Answer
Correct Answer:
Tracing paper method
Note: This Question is unanswered, help us to find answer for this one
28. If the run-off coefficient of an area is 0.20 and the total rainfall in that area is 20 centimeters, calculate the run off.
Answer
Correct Answer:
4 centimeters
Note: This Question is unanswered, help us to find answer for this one
29. ____________ is called the undersurface of a stair.
Answer
Correct Answer:
Soffit
Note: This Question is unanswered, help us to find answer for this one
30. What is the value of the angle of the penetrating cone in a static penetrometer test?
Answer
Correct Answer:
60°
Note: This Question is unanswered, help us to find answer for this one
31. The toughness index of soil is:
Answer
Correct Answer:
Plasticity index / flow index
Note: This Question is unanswered, help us to find answer for this one
32. What is the value of the uniformity coefficient of soil?
Answer
Correct Answer:
D60 / D10
Note: This Question is unanswered, help us to find answer for this one
33. For a building, the wind pressure and wind velocity are related as:
Answer
Correct Answer:
wind pressure x (wind velocity)²
Note: This Question is unanswered, help us to find answer for this one
34. The mass specific gravity of soil in its dry state is known as:
Answer
Correct Answer:
shrinkage ratio
Note: This Question is unanswered, help us to find answer for this one
35. ___________ line joins the vertices of the trusses.
Answer
Correct Answer:
Ridge
Note: This Question is unanswered, help us to find answer for this one
36. Which among the following tests of field identification of soils consists of the sieving process?
Answer
Correct Answer:
Dilatency test
Note: This Question is unanswered, help us to find answer for this one
37. In an RCC structure, the value of modular ratio for design is _______.
Answer
Correct Answer:
15
Note: This Question is unanswered, help us to find answer for this one
38. The heat generated by the cement when it hardens is known as __________.
Answer
Correct Answer:
heat of hydration
Note: This Question is unanswered, help us to find answer for this one
39. The structure which is used to support a vertical cladding is known as ____________.
Answer
Correct Answer:
runner
Note: This Question is unanswered, help us to find answer for this one
40. The value of the Poisson's ratio for concrete lies between:
Answer
Correct Answer:
0.15 and 0.25
Note: This Question is unanswered, help us to find answer for this one
41. What is the intensity of the active earth pressure at a depth of 10 meters, given that the coefficient of active earth pressure is 3 and the unit weight of dry sand is 2 tonnes per cubic meter?
Answer
Correct Answer:
60 tonnes per square meter
Note: This Question is unanswered, help us to find answer for this one
42. The process of mixing sand in natural soil in order to improve the quality of soil is known as _____.
Answer
Correct Answer:
blending
Note: This Question is unanswered, help us to find answer for this one
43. ___________ is carried out to determine the safety bond stress between concrete and steel.
Answer
Correct Answer:
Pullout test
Note: This Question is unanswered, help us to find answer for this one
44. In a concrete slab, the value of the reinforcement is taken as ___.
Answer
Correct Answer:
4%
Note: This Question is unanswered, help us to find answer for this one
45. What is the value of the radius of a 1° circular curve?
Answer
Correct Answer:
1146 meters
Note: This Question is unanswered, help us to find answer for this one
46. The minimum value of factor of safety of a plain concrete retaining wall is __.
Answer
Correct Answer:
2
Note: This Question is unanswered, help us to find answer for this one
47. What is the average value of creep coefficient of cement concrete?
Answer
Correct Answer:
3
Note: This Question is unanswered, help us to find answer for this one
48. The above given symbol is used for indicating:
Answer
Correct Answer:
tunnel
Note: This Question is unanswered, help us to find answer for this one
49. ___________ is an assembly of over-lapping photographs.
Answer
Correct Answer:
Mosaic
Note: This Question is unanswered, help us to find answer for this one
50. ________________ is the line having zero declination.
Answer
Correct Answer:
Agonic line
Note: This Question is unanswered, help us to find answer for this one
51. If M is the bending moment, E is the modulus of elasticity and I is the polar moment of Inertia then, what is the value of the strain energy stored by an elastic member which is subjected to bending?
Answer
Correct Answer:
∫M² / 2Ei ds
Note: This Question is unanswered, help us to find answer for this one
52. In a two way slab, the reinforcement is provided:
Answer
Correct Answer:
along the diagonal of the slab.
Note: This Question is unanswered, help us to find answer for this one
53. What is the value of the minimum depth for laying foundations below the ground level?
Answer
Correct Answer:
50 centimeters
Note: This Question is unanswered, help us to find answer for this one
54. Which among the following methods is used to determine the water content of coarse grained soils?
Answer
Correct Answer:
Pycnometer method
Note: This Question is unanswered, help us to find answer for this one
55. A sextant is a device capable of measuring angles up to _____.
Answer
Correct Answer:
120°
Note: This Question is unanswered, help us to find answer for this one
56. A squint junction is:
Answer
Correct Answer:
one in which two walls meet at an angle other than 90°
Note: This Question is unanswered, help us to find answer for this one
57. _____________ is the process of addition of a layer of cement mortar to the surface of concrete.
Answer
Correct Answer:
Rendering
Note: This Question is unanswered, help us to find answer for this one
58. The deformation of a hot brick when water falls on it is known as _______.
Answer
Correct Answer:
chuffing
Note: This Question is unanswered, help us to find answer for this one
59. The soil which offers minimum resistance to the flow of electric current is known as _______.
Answer
Correct Answer:
marshy ground
Note: This Question is unanswered, help us to find answer for this one
60. ___________ is the distance between two adjacent trusses.
Answer
Correct Answer:
Bay
Note: This Question is unanswered, help us to find answer for this one
61. ____________ is the ratio of the weight of the soil solids to the volume of the soil mass.
Answer
Correct Answer:
Dry density
Note: This Question is unanswered, help us to find answer for this one
62. What is the value of the effective depth of a T-beam for heavy loads?
Answer
Correct Answer:
1/12th of the span
Note: This Question is unanswered, help us to find answer for this one
63. A pressure hypsometer works on the phenomena:
Answer
Correct Answer:
that boiling point varies with altitude.
Note: This Question is unanswered, help us to find answer for this one
64. ___________ is used to establish a benchmark.
Answer
Correct Answer:
Trigonometric leveling
Note: This Question is unanswered, help us to find answer for this one
65. A curve headed groin is known as __________.
Answer
Correct Answer:
Hockey groin
Note: This Question is unanswered, help us to find answer for this one
66. What is the value of the angle of intersection of a contour and a ridge line?
Answer
Correct Answer:
90°
Note: This Question is unanswered, help us to find answer for this one
67. In which among the following methods of calculating the runoff consumption is the estimation of the rain water absorbed by the soil carried out?
Answer
Correct Answer:
Run-off infiltration method
Note: This Question is unanswered, help us to find answer for this one
68. What is percolation coefficient?
Answer
Correct Answer:
Loss of head / loss of creep
Note: This Question is unanswered, help us to find answer for this one
69. Which type of cement has a final setting time of 30 minutes?
Answer
Correct Answer:
Quick setting cement
Note: This Question is unanswered, help us to find answer for this one
70. A canal must be aligned along the ___________ for optimum utilization.
Answer
Correct Answer:
ridge line
Note: This Question is unanswered, help us to find answer for this one
71. ___________ is an obstruction in the bed of a stream in order to make the water flow into a nearby channel.
Answer
Correct Answer:
Diversion work
Note: This Question is unanswered, help us to find answer for this one
72. The maximum amount of eccentricity load that can be applied on a rectangular foundation having width 'd' is:
Answer
Correct Answer:
d/4
Note: This Question is unanswered, help us to find answer for this one
73. Calculate the length which must be embedded in order to develop a resistance equal to the tensile pull in a steel rod having a diameter of 20 millimeters, when the value of maximum permissible tensile stress in tension is 80 newtons per square millimeter and the value of the bond stress between the concrete and the steel bar is 100 newtons per square millimeter.
Answer
Correct Answer:
4 millimeters
Note: This Question is unanswered, help us to find answer for this one
74. Which of the following is used for making building materials capable of withstanding temperature of 773.15 Kelvin?
Answer
Correct Answer:
Mica
Note: This Question is unanswered, help us to find answer for this one
75. In a steel structure, what is an under-reinforced section?
Answer
Correct Answer:
Section in which steel reaches its maximum stress earlier than concrete reaches its maximum stress.
Note: This Question is unanswered, help us to find answer for this one
76. The factor of safety of a building is:
Answer
Correct Answer:
yield stress / working stress
Note: This Question is unanswered, help us to find answer for this one
77. A cement is unfit for use if it absorbs moisture in excess of ________.
Answer
Correct Answer:
5%
Note: This Question is unanswered, help us to find answer for this one
78. For constructing a structure in water, we use a type of stone that possesses the ability to float on water. What is it called?
Answer
Correct Answer:
Pumice
Note: This Question is unanswered, help us to find answer for this one
79. What is the value of the slope of the angle of a stair?
Answer
Correct Answer:
not less than 20°
Note: This Question is unanswered, help us to find answer for this one
80. The re-designing of an RC beam is usually done when its shear stress exceeds _________.
Answer
Correct Answer:
20 kilograms per square centimeter
Note: This Question is unanswered, help us to find answer for this one
81. The slenderness ratio of a compression structural member is:
Answer
Correct Answer:
effective length / least radius of gyration
Note: This Question is unanswered, help us to find answer for this one
82. In a constant head parameter test of 5 minutes duration, the quantity of water collected is 450 milliliters. Calculate the discharge per unit time.
Answer
Correct Answer:
1.5 milliliters per second
Note: This Question is unanswered, help us to find answer for this one
83. The strap efficiency of a reservoir is a function of:
Answer
Correct Answer:
Reservoir capacity / total inflow
Note: This Question is unanswered, help us to find answer for this one
84. ___________ is the extension of the wall above the roof level.
Answer
Correct Answer:
Retaining wall
Note: This Question is unanswered, help us to find answer for this one
85. The _________ helps in reducing the shrinkage of concrete.
Answer
Correct Answer:
water content of the mixture
Note: This Question is unanswered, help us to find answer for this one
86. Which type of cement among the following is capable of withstanding high temperatures?
Answer
Correct Answer:
Refractory cement
Note: This Question is unanswered, help us to find answer for this one
87. Which form of lime among the following hardens due to the absorption of carbon dioxide in the atmosphere?
Answer
Correct Answer:
Fat lime
Note: This Question is unanswered, help us to find answer for this one
88. Which of the following equipments are used for distance measurement.
Answer
Correct Answer:
Geodimeter
Note: This Question is unanswered, help us to find answer for this one
89. The beams which support the stair steps are known as:
Answer
Correct Answer:
stringers
Note: This Question is unanswered, help us to find answer for this one
90. ___________ is the branch of hydrology which deals with the moisture content in the soil.
Answer
Correct Answer:
Pedohydrology
Note: This Question is unanswered, help us to find answer for this one
91. Which type of joint is used to make wooden floors?
Answer
Correct Answer:
Tongue & Groove joint
Note: This Question is unanswered, help us to find answer for this one
92. The most effective method of curing of concrete is :
Answer
Correct Answer:
covering the concrete with moist cloth.
Note: This Question is unanswered, help us to find answer for this one
93. __________ is the portion of a wall which is used to support an arch.
Answer
Correct Answer:
Abutment
Note: This Question is unanswered, help us to find answer for this one
94. ____________ when water is added to the cement.
Answer
Correct Answer:
Heat is generated
Note: This Question is unanswered, help us to find answer for this one
95. __________ is a line which joins subsidiary stations with the main line.
Answer
Correct Answer:
Tie line
Note: This Question is unanswered, help us to find answer for this one
96. __________ is used/done to check the strength of the concrete by virtue of the sound it makes.
Answer
Correct Answer:
Le chatelier apparatus
Note: This Question is unanswered, help us to find answer for this one
97. Which type of surveying method is used to ascertain the quantities of dredged material?
Answer
Correct Answer:
Hydrographic surveying method
Note: This Question is unanswered, help us to find answer for this one
98. Which grade of brick can withstand below freezing temperatures in moist climate?
Answer
Correct Answer:
Grade SW
Note: This Question is unanswered, help us to find answer for this one
99. The volume of a specimen of soil is 20 cubic centimeters and its weight is 50 grams. Calculate the volumetric shrinkage if the volume of dry specimen is 10 cubic centimeters.
Answer
Correct Answer:
100%
Note: This Question is unanswered, help us to find answer for this one
100. In a joint, the number of rivets required is calculated by using the formula ____________.
Answer
Correct Answer:
force / rivet value
Note: This Question is unanswered, help us to find answer for this one
101. The deflection of any rectangular beam simply supported is
Answer
Correct Answer:
inversely proportional to the cube of its depth
Note: This Question is unanswered, help us to find answer for this one
102. The portion of a brick cut across the width, is called
Answer
Correct Answer:
bed
Note: This Question is unanswered, help us to find answer for this one
103. Which of these is an instrument used to measure characteristics of precipitation?
Answer
Correct Answer:
disdrometer
Note: This Question is unanswered, help us to find answer for this one
104. What determines how well concrete will flow when being mixed?
Answer
Correct Answer:
The rheological property
Note: This Question is unanswered, help us to find answer for this one
105. What is the name for an auxiliary dam constructed to confine the reservoir created by a primary dam?
Answer
Correct Answer:
saddle dam
Note: This Question is unanswered, help us to find answer for this one
106. Which step comes first after casting concrete?
Answer
Correct Answer:
Screeding
Note: This Question is unanswered, help us to find answer for this one
107. What is the correct term for the self weight of soil mass?
Answer
Correct Answer:
Geostatic stress
Note: This Question is unanswered, help us to find answer for this one
108. The initial setting time of lime-pozzolona, is
Answer
Correct Answer:
120 minutes
Note: This Question is unanswered, help us to find answer for this one
109. What technique can be used to estimate the environmental impacts associated with using a particular building material?
Answer
Correct Answer:
Life Cycle Assessment
Note: This Question is unanswered, help us to find answer for this one
110. What type of building materials are able to absorb high amounts of latent heat?
Answer
Correct Answer:
Phase change materials
Note: This Question is unanswered, help us to find answer for this one
111. What is one possible adverse impact of drawing water away from a river for irrigation?
Answer
Correct Answer:
Increased saltwater intrusion
Note: This Question is unanswered, help us to find answer for this one
112. What is the term used for the systematic measurement of the alteration in the shape or dimensions of a structure as a result of stresses induced by applied loads?
Answer
Correct Answer:
deformation survey
Note: This Question is unanswered, help us to find answer for this one
113. What seperates the inner enviroment of a building from the outside environment?
Answer
Correct Answer:
The building envelope
Note: This Question is unanswered, help us to find answer for this one
114. What can be incorporated into steel structure design to minimize the amount of column supports?
Answer
Correct Answer:
Jack beams
Note: This Question is unanswered, help us to find answer for this one
115. Which process allows precipitation to make its way from ground surface to below surface water supplies?
Answer
Correct Answer:
Groundwater recharge
Note: This Question is unanswered, help us to find answer for this one
116. When two metals form a galvanic cell, which one will oxidize first?
Answer
Correct Answer:
The more anodic metal
Note: This Question is unanswered, help us to find answer for this one
117. As soil clay content increases, what happens to the plastic limit?
Answer
Correct Answer:
It decreases
Note: This Question is unanswered, help us to find answer for this one
118. What is transit surveying?
Answer
Correct Answer:
Using a transit tool for surveying.
Note: This Question is unanswered, help us to find answer for this one
119. The force that keeps a collection of soil particles rigid is called:
Answer
Correct Answer:
effective stress
Note: This Question is unanswered, help us to find answer for this one
120. Pervious concrete is a kind of concrete containing little to no
Answer
Correct Answer:
fine aggregates
Note: This Question is unanswered, help us to find answer for this one
121. Which of these is ordinarily NOT a component of a fired brick?
Answer
Correct Answer:
ash
Note: This Question is unanswered, help us to find answer for this one
122. What is the right definition of a soil Plasticity Index ( PI )
Answer
Correct Answer:
The PI is the difference between the liquid limit and the plastic limit (PI = LL-PL)
Note: This Question is unanswered, help us to find answer for this one
123. A pitot tube is used to measure
Answer
Correct Answer:
velocity of flow
Note: This Question is unanswered, help us to find answer for this one
124. Which of these is an instrument used to measure or set horizontal levels?
Answer
Correct Answer:
dumpy level
Note: This Question is unanswered, help us to find answer for this one
125. What effect will the addition of calcium chloride have on concrete?
Answer
Correct Answer:
acceleration of hardening process
Note: This Question is unanswered, help us to find answer for this one
126. What characteristic expresses the strength property of reinforced concrete?
Answer
Correct Answer:
Yield strength
Note: This Question is unanswered, help us to find answer for this one
127. In terms of surveying for distance measurements, what does EDM stand for?
Note: This Question is unanswered, help us to find answer for this one
128. What is the function of interior partions in structural design?
Answer
Correct Answer:
Space planning
Note: This Question is unanswered, help us to find answer for this one
129. By definition, what is the water filling percentage of soil pore volume for saturated soil?
Answer
Correct Answer:
100%
Note: This Question is unanswered, help us to find answer for this one
130. Which kind of soil is least susceptible to soil liquification?
Answer
Correct Answer:
well graded
Note: This Question is unanswered, help us to find answer for this one
131. What creates an Aeolian effect on soil?
Answer
Correct Answer:
Wind
Note: This Question is unanswered, help us to find answer for this one
132. How is rainfall runoff verses infiltration into soil calculated?
Answer
Correct Answer:
The runoff curve number method
Note: This Question is unanswered, help us to find answer for this one
133. Which of the following does not have columns in internal occupied spaces?
Answer
Correct Answer:
Clear Span Building
Note: This Question is unanswered, help us to find answer for this one
134. Which of these measuring devices measures non-georeferenced displacements?
Answer
Correct Answer:
Geotechnical measuring devices
Note: This Question is unanswered, help us to find answer for this one
135. Which of the following would be calculated into the design of a reinforced concrete structure?
Answer
Correct Answer:
Wind load
Note: This Question is unanswered, help us to find answer for this one
136. Effective stress of soil is the difference in the soil's total stress and its:
Answer
Correct Answer:
pore water pressure
Note: This Question is unanswered, help us to find answer for this one
137. The theoretical point of failure for a structure under design loads is called
Answer
Correct Answer:
ultimate limit state
Note: This Question is unanswered, help us to find answer for this one
138. True or False: Straight Walled Buildings provide more usable space than Steel Arched Buildings.
Answer
Correct Answer:
True
Note: This Question is unanswered, help us to find answer for this one
139. Curing is the process of what?
Answer
Correct Answer:
Watering
Note: This Question is unanswered, help us to find answer for this one
140. Which of these is a Concrete Slab Restoration Method used for roads?
Answer
Correct Answer:
slab stabilization
Note: This Question is unanswered, help us to find answer for this one
141. Furrow irrigation is a type of:
Answer
Correct Answer:
surface irrigation
Note: This Question is unanswered, help us to find answer for this one
142. Depending on water content in soil, which of these is NOT a "state" of soil?
Answer
Correct Answer:
granular
Note: This Question is unanswered, help us to find answer for this one
143. Which of these CANNOT be used to measure horizontal angles in surveying?
Answer
Correct Answer:
altimeter
Note: This Question is unanswered, help us to find answer for this one
144. Foundations are placed below ground level to increase
Answer
Correct Answer:
the stability of structure
Note: This Question is unanswered, help us to find answer for this one
145. What is the minimum yield stress for a steel to be considered high strength?
Answer
Correct Answer:
36000 pounds per square inch
Note: This Question is unanswered, help us to find answer for this one
146. When performing stress analysis in reinforced concrete beams, what should you assume of concrete in tension?
Answer
Correct Answer:
It is cracked and has no strength
Note: This Question is unanswered, help us to find answer for this one
147. Which of the following would be considered a composite building material?
Answer
Correct Answer:
Engineered wood
Note: This Question is unanswered, help us to find answer for this one
148. What can be used to determine the specific gravity of a particular concrete mix?
Answer
Correct Answer:
Specific Gravity Bench
Note: This Question is unanswered, help us to find answer for this one
149. Which method of irrigation artificially raises the water table to allow the soil to be moistened from below the plants' root zone?
Answer
Correct Answer:
sub-irrigation
Note: This Question is unanswered, help us to find answer for this one
150. What is the starting point of building structural design?
Answer
Correct Answer:
The building foundation
Note: This Question is unanswered, help us to find answer for this one
151. Agriculture that relies only on rainfall and not on irrigation is known as:
Answer
Correct Answer:
dryland farming
Note: This Question is unanswered, help us to find answer for this one
152. The Stressed Ribbon Bridge is a type of
Answer
Correct Answer:
suspension bridge
Note: This Question is unanswered, help us to find answer for this one
153. Which is a generally accepted minimum safety factor?
Answer
Correct Answer:
1.7
Note: This Question is unanswered, help us to find answer for this one
154. Cement is produced by heating limestone and other materials through a process called
Answer
Correct Answer:
calcination
Note: This Question is unanswered, help us to find answer for this one
155. What is an effective means of creating soil compaction?
Answer
Correct Answer:
Sheepfoot roller
Note: This Question is unanswered, help us to find answer for this one
156. What is added to normal concrete in order to make RCC?
Answer
Correct Answer:
rebar
Note: This Question is unanswered, help us to find answer for this one
157. Which of the following is NOT a steel structural shape?
Answer
Correct Answer:
V shaped cross-section
Note: This Question is unanswered, help us to find answer for this one
158. What is the civil engineer's term for the unaggregated or uncemented deposits of mineral and/or organic particles covering large portion of the earth's crust?
Answer
Correct Answer:
Soil
Note: This Question is unanswered, help us to find answer for this one
159. What is the popular term for sustainable building materials?
Answer
Correct Answer:
Green materials
Note: This Question is unanswered, help us to find answer for this one
160. Concrete is reinforced to help withstand what force upon it?
Answer
Correct Answer:
Tensile force
Note: This Question is unanswered, help us to find answer for this one
161. What is another term for groundwater hydrology?
Answer
Correct Answer:
hydrogeology
Note: This Question is unanswered, help us to find answer for this one
162. What is one element of building materials that can contribute to increased energy efficiency?
Answer
Correct Answer:
Thermal storage capacity
Note: This Question is unanswered, help us to find answer for this one
163. Which would likely have the highest permeability?
Answer
Correct Answer:
sand
Note: This Question is unanswered, help us to find answer for this one
164. How does the basic ratio of span/effective depth influence the design of reinforced concrete structures?
Answer
Correct Answer:
Determines the sizing and spacing of beam and slab construction
Note: This Question is unanswered, help us to find answer for this one
165. A bridge is built in such a way that it will not collapse under pressure. Its design also makes it difficult for drivers to navigate it safely, due to abnormal deflections. This bridge has low:
Answer
Correct Answer:
Serviceability
Note: This Question is unanswered, help us to find answer for this one
166. A beam in which the tension capacity of the tension steel is greater than the combined compression capacity of the concrete and the compression steel is called:
Answer
Correct Answer:
over-reinforced beam
Note: This Question is unanswered, help us to find answer for this one
167. The necessary condition in Permissible Stress Design is that stresses developed in a structure due to service loads do not exceed the:
Answer
Correct Answer:
elastic limit
Note: This Question is unanswered, help us to find answer for this one
168. What is used to embed rebars in masonry walls?
Answer
Correct Answer:
grout
Note: This Question is unanswered, help us to find answer for this one
169. Fresh concrete is best:
Answer
Correct Answer:
poured
Note: This Question is unanswered, help us to find answer for this one
170. Which is the best example of a temporary load imposed on a structure?
Answer
Correct Answer:
Live load
Note: This Question is unanswered, help us to find answer for this one
171. True or False: The coefficient of expansion of concrete is much greater than that of steel.
Answer
Correct Answer:
False
Note: This Question is unanswered, help us to find answer for this one
172. What term relates to the way water balance systems effect a landscape?
Answer
Correct Answer:
Hydrology
Note: This Question is unanswered, help us to find answer for this one
173. How many states of water exist?
Answer
Correct Answer:
3
Note: This Question is unanswered, help us to find answer for this one
174. How do we describe the study of soil, its behavior and application as an engineering material?
Answer
Correct Answer:
Soil mechanics
Note: This Question is unanswered, help us to find answer for this one
175. Which of these is considered a hazardous building material?
Answer
Correct Answer:
asbestos
Note: This Question is unanswered, help us to find answer for this one
176. Name the type of connection in which the steel column can rotate but not move up, down, right or left.
Answer
Correct Answer:
Pin Connection
Note: This Question is unanswered, help us to find answer for this one
177. In concrete, the dry composite of aggregate and binder hardens through the process of
Answer
Correct Answer:
hydration
Note: This Question is unanswered, help us to find answer for this one
178. What factor should be considered when selecting a building material?
Answer
Correct Answer:
(All of these)
Note: This Question is unanswered, help us to find answer for this one
179. The technique of determining the terrestrial position of points and the distances and angles between them is called
Answer
Correct Answer:
surveying
Note: This Question is unanswered, help us to find answer for this one
180. What type of steel structure building load is created by an earthquake?
Answer
Correct Answer:
Siesmic load
Note: This Question is unanswered, help us to find answer for this one
181. What is the name of the process for laying out and measuring three dimentional points on landscapes?
Answer
Correct Answer:
Surveying
Note: This Question is unanswered, help us to find answer for this one
182. What is the function of cement in concrete?
Answer
Correct Answer:
Binder
Note: This Question is unanswered, help us to find answer for this one
183. A beam supported only at one end is called a
Answer
Correct Answer:
cantilever
Note: This Question is unanswered, help us to find answer for this one
184. Which of the following characteristics make the use of steel popular in the construction of skyscrapers?
Answer
Correct Answer:
High Strength to Weight Ratio
Note: This Question is unanswered, help us to find answer for this one
185. What is the primary material in RCC design?
Answer
Correct Answer:
Reinforced concrete
Note: This Question is unanswered, help us to find answer for this one
186. What is the the name of the part of a building above its foundation?
Answer
Correct Answer:
Superstructure
Note: This Question is unanswered, help us to find answer for this one
187. Bitumen felt is:
Answer
Correct Answer:
All of these.
Note: This Question is unanswered, help us to find answer for this one
188. What purpose to gravel or crushed rock serve in a concrete mix?
Answer
Correct Answer:
Agreggate
Note: This Question is unanswered, help us to find answer for this one
189. What tool is used to measure angles in the horizontal and vertical planes?
Answer
Correct Answer:
Theodolite
Note: This Question is unanswered, help us to find answer for this one
190. Which type of soil has more plasticity?
Answer
Correct Answer:
cohesive
Note: This Question is unanswered, help us to find answer for this one
191. Slab-on-grade foundation is a type of
Answer
Correct Answer:
shallow foundation
Note: This Question is unanswered, help us to find answer for this one
192. How is thermal expansion accomodated in metallic structure design?
Answer
Correct Answer:
Expansion joints
Note: This Question is unanswered, help us to find answer for this one
193. In soil, the ratio of volume of voids to the total volume is called:
Answer
Correct Answer:
porosity
Note: This Question is unanswered, help us to find answer for this one
194. True or False: Concrete has high tensile strength but low compressive strength.
Answer
Correct Answer:
False
Note: This Question is unanswered, help us to find answer for this one
195. What is the calculated dead load weight of a bridge?
Answer
Correct Answer:
The weight of the bridge structure itself
Note: This Question is unanswered, help us to find answer for this one
196. What factor is important to resist freeze-thaw effect on concrete?
Answer
Correct Answer:
Air entrainment
Note: This Question is unanswered, help us to find answer for this one
197. Which is the most widely used general purpose cement in the world?
Answer
Correct Answer:
Portland cement
Note: This Question is unanswered, help us to find answer for this one
