> > Autodesk Inventor MCQs > Basic Autodesk Inventor MCQs

Basic Autodesk Inventor MCQ

1. What are the default file extensions for ilogic files?

*.ilg, *.mcr, *.txt

*.vb, *.macro, *.lgc

*.iLogicVB, *.txt, *.vb

Answer

Correct Answer: *.iLogicVB, *.txt, *.vb

Note: This Question is unanswered, help us to find answer for this one

2. Where do you find Inventor Studio on the ribbon?

View, Windows, Inventor Studio

Environments, Inventor Studio

Tools, Materials & Appearance

Answer

Correct Answer: Environments, Inventor Studio

Note: This Question is unanswered, help us to find answer for this one

3. How do you edit or add attributes such as dimension style or precision?

Document Manager

Utilities

Manage Attributes

Styles Editor

Answer

Correct Answer: Styles Editor

Note: This Question is unanswered, help us to find answer for this one

4. Where do you find the "Add Plane" command on the ribbon?

Insert, Surface, Plane

Surface, Add, Plane

Primitives, Plane

3D Modeling, Work Features, Plane

Answer

Correct Answer: 3D Modeling, Work Features, Plane

Note: This Question is unanswered, help us to find answer for this one

5. Which of the following is NOT used to calculate distortion?

Material thickness

Bend allowance

Material rigidity

Material type

Answer

Correct Answer: Material rigidity

Note: This Question is unanswered, help us to find answer for this one

6. What sub menu tool tab is used for repairing and stitching surfaces and solids?

Construction

Part

Studio

Fusion

Answer

Correct Answer: Construction

Note: This Question is unanswered, help us to find answer for this one

7. When you create a Virtual Component in place, you must:

use a Virtual Component Template.

select from Content Center.

select from the BOM Structure list.

select the Virtual Component checkbox.

Answer

Correct Answer: select from the BOM Structure list.

Note: This Question is unanswered, help us to find answer for this one

8. What tool do you use to change the default color of materials?

Color Override

Color Set

Material Skin

Texture Select

Answer

Correct Answer: Color Override

Note: This Question is unanswered, help us to find answer for this one

9. Using Design Accelerator you can design:

Roller bearings

Shafts

Plastic injection products

Spur gears

Answer

Correct Answer: Plastic injection products

Note: This Question is unanswered, help us to find answer for this one

10. Setting the 1st angle and 3rd angle projections as defaults for a template can be done using:

Tools menu

Can't be changed

View menu

Styles editor

Answer

Correct Answer: Styles editor

Note: This Question is unanswered, help us to find answer for this one

11. What environment is used when a solid is edited through the Edit Form command?

Model Space

Fusion

Construction

Sketch

Answer

Correct Answer: Fusion

Note: This Question is unanswered, help us to find answer for this one

12. To create a sub-assembly from components in an existing assembly:

You delete the components in the assembly

You create a new assembly and then insert it into the existing assembly

You delete all the components that will not be in the sub-assembly

You demote the components

Answer

Correct Answer: You demote the components

Note: This Question is unanswered, help us to find answer for this one

13. In a drawing, you can add a dimension to the intersection point of two lines by:

Sketching the intersection first and then dimensioning it

Selecting: the first line, right click, intersection, then select the second line

Using the intersect snap option

Right click and select intersection and then pick both lines

Answer

Correct Answer: Selecting: the first line, right click, intersection, then select the second line

Note: This Question is unanswered, help us to find answer for this one

14. To constrain components together without using a dialog box or on placement use:

the Grip Snap command.

the Constrain command.

The Move command.

the Assemble command.

Answer

Correct Answer: the Assemble command.

Note: This Question is unanswered, help us to find answer for this one

15. The _______ feature can blend dissimilar 2D sketches on nonintersecting planes.

parametric

loft

sketch

fillet

Answer

Correct Answer: loft

Note: This Question is unanswered, help us to find answer for this one

16. A ________ constraint error occurs when a component is constrained in a position but subsequent modifications are made to a constrained part.

geometry missing

part

mate

joint

Answer

Correct Answer: geometry missing

Note: This Question is unanswered, help us to find answer for this one

17. You could use a _______ file to create an exploded view.

.iam

.part

.ipn

.expld

Answer

Correct Answer: .ipn

Note: This Question is unanswered, help us to find answer for this one

18. What is the purpose of making parts and assemblies adaptive?

It aids in automatic view generation

It creates automatic constraints

It provides for cross part relationships

It allows the parts and assemblies to be edited

Answer

Correct Answer: It provides for cross part relationships

Note: This Question is unanswered, help us to find answer for this one

19. To make sure that your parts do not intersect unrealistically, you would use the _________.

Fallacy Detection

Collision report

Contact Solver

Structural Strength test

Answer

Correct Answer: Contact Solver

Note: This Question is unanswered, help us to find answer for this one

20. True or False? Ribs add support to a component by changing its main shape.

True

False

Answer

Correct Answer: False

Note: This Question is unanswered, help us to find answer for this one

21. Copying a feature from a part and storing it in a feature file is called __________.

copying

extraction

extrusion

mirroring

Answer

Correct Answer: extraction

Note: This Question is unanswered, help us to find answer for this one

22. To specify motion of gears, you would use a _______ constraint.

gear

technical

motion

rotation

Answer

Correct Answer: rotation

Note: This Question is unanswered, help us to find answer for this one

23. In an Assembly, what constraint would you use to align two part faces so that their direction arrows are parallel?

Insert with a Solution of Aligned

Mate with a Solution of Mate

Mate with a Solution of Flush

Insert with a Solution of Opposed

Answer

Correct Answer: Mate with a Solution of Flush

Note: This Question is unanswered, help us to find answer for this one

24. The Loft command will create a loft using:

All of these

A closed profile sketch and a sketched point

Multiple closed profile sketches

Multiple closed profile sketches and one or more rail sketches

Answer

Correct Answer: All of these

Note: This Question is unanswered, help us to find answer for this one

25. The coordinate system of a sketch:

Must be defined each time

Is fixed

Constantly changes

Can be modified

Answer

Correct Answer: Can be modified

Note: This Question is unanswered, help us to find answer for this one

26. To join axes you would likely use a _______ constraint.

joint

connect

mate

union

Answer

Correct Answer: mate

Note: This Question is unanswered, help us to find answer for this one

27. You can create Inventor presentation files by opening a new file with the _____ extension.

.ips

.ipt

.iam

.ipn

Answer

Correct Answer: .ipn

Note: This Question is unanswered, help us to find answer for this one

28. When creating a drawing view, Tangent Edges:

Created manually

Can be shown from the view component window

Cannot be shown

Can be shown from the view display option window

Answer

Correct Answer: Can be shown from the view display option window

Note: This Question is unanswered, help us to find answer for this one

29. The ______ specifies which add-ins to load at startup.

None of these

User Profile

Add in Manager

Macro Manager

Answer

Correct Answer: Add in Manager

Note: This Question is unanswered, help us to find answer for this one

30. What is the default Extents option for the Extrude command?

Between

All

Distance

Answer

Correct Answer: Distance

Note: This Question is unanswered, help us to find answer for this one

31. To analyze characteristics of an assembly in motion, you would use _______.

Motion Analytics

Dynamic Simulation

Movement Metrics

Dynamic Analytics

Answer

Correct Answer: Dynamic Simulation

Note: This Question is unanswered, help us to find answer for this one

32. Replace All will replace each occurrence in:

a presentation document.

an assembly document.

a drawing document.

a part document.

Answer

Correct Answer: an assembly document.

Note: This Question is unanswered, help us to find answer for this one

33. What does HUD stand for?

Hook Under Designs

Heads-Up-Display

Hard Uther Donations

Honed Use Dimensions

Answer

Correct Answer: Heads-Up-Display

Note: This Question is unanswered, help us to find answer for this one

34. On the Ribbon, View tab, where would you find the command for visual styles?

In the Windows panel.

In the Visibility panel.

In the Appearance panel.

In the Navigate panel.

Answer

Correct Answer: In the Appearance panel.

Note: This Question is unanswered, help us to find answer for this one

35. Autodesk Inventor modules don't include:

Dynamic simulation

Tube and pipe design

Plant layout

Answer

Correct Answer: Plant layout

Note: This Question is unanswered, help us to find answer for this one

36. In an assembly, what is the maximum degrees of freedom a component can have?

Answer

Correct Answer: 6

Note: This Question is unanswered, help us to find answer for this one

37. How do you create a tank cone

Straight cone face

combining sketch straight length and knuckle radius and revolve at the vertical center line

curved cone radius

Answer

Correct Answer: combining sketch straight length and knuckle radius and revolve at the vertical center line

Note: This Question is unanswered, help us to find answer for this one

38. True or False? Within Inventor a 'drawing' is 2D.

False

True

Answer

Correct Answer: True

Note: This Question is unanswered, help us to find answer for this one

39. In a multiuser environment, Inventor's primary means for organizing data, including files, libraries, and revision control is a:

Vault project

Path statement

Application option

Template file

Answer

Correct Answer: Vault project

Note: This Question is unanswered, help us to find answer for this one

40. True or False? Setting a subassembly as "phantom" prevents it from being listed in the bill of materials while still allowing the parts contained within the subassembly to be listed.

False

True

Answer

Correct Answer: True

Note: This Question is unanswered, help us to find answer for this one

41. Where will you change the units for a part or assembly.

manage - styles and standards editor - material

tools - document settings - units

tools - application option - part/assembly

Answer

Correct Answer: tools - document settings - units

Note: This Question is unanswered, help us to find answer for this one

42. True of false? If your model fails a stress analysis it will create an exploded view

False

TRUE

Answer

Correct Answer: False

Note: This Question is unanswered, help us to find answer for this one

43. If you transfer a file from SolidWorks to Autodesk Inventor, you most likely will save it as a ______ file.

.ipn

STEP

MAC

TRSN

Answer

Correct Answer: STEP

Note: This Question is unanswered, help us to find answer for this one

44. In a drawing, the first view created is the:

Projected view

Layout view

Base view

Initial view

Answer

Correct Answer: Base view

Note: This Question is unanswered, help us to find answer for this one

45. What does FEA stand for?

Finite Element Analysis

Free Element Analysis

Fixed Element Analysis

Force Element Analysis

Answer

Correct Answer: Finite Element Analysis

Note: This Question is unanswered, help us to find answer for this one

46. What term describes testing how an object will react under real world stress (weight, torque, etc.)?

Extrusion

Weather

Dynamic Simulation

Spline

Answer

Correct Answer: Dynamic Simulation

Note: This Question is unanswered, help us to find answer for this one

47. True or false? A 2D sketch is the first step of the parametric modeling process.

FALSE

True

Answer

Correct Answer: True

Note: This Question is unanswered, help us to find answer for this one

48. What is the extension of a part file?

.ipt

.par

.pt

.iam

Answer

Correct Answer: .ipt

Note: This Question is unanswered, help us to find answer for this one

49. True or false? Drawing files can contain: sheet formats, title blocks, borders, and sketched blocks.

True

FALSE

Answer

Correct Answer: True

Note: This Question is unanswered, help us to find answer for this one

50. What is the basic file type of Inventor?

Base file

Land file

Part file

Assembly file

Answer

Correct Answer: Part file

Note: This Question is unanswered, help us to find answer for this one

51. A 3D Sketch provides the ability to produce geometry that is the result of:

All of these

The intersection of two surfaces

The generation of silhouette edges

A curve projected on a surface

Answer

Correct Answer: All of these

Note: This Question is unanswered, help us to find answer for this one

52. To render and animate, you should use ________.

Adobe Illustrator

AutoCAD

Stress Analysis

Inventor Studio

Answer

Correct Answer: Inventor Studio

Note: This Question is unanswered, help us to find answer for this one

53. Which of the following is the file extension for an Inventor drawing?

.ipn

.idw

.iam

.ipt

Answer

Correct Answer: .idw

Note: This Question is unanswered, help us to find answer for this one

54. A feature that adds depth to a sketch is called a/an __________ feature.

deep

extruding

depth

Answer

Correct Answer: extruding

Note: This Question is unanswered, help us to find answer for this one

55. What is the extension for an assembly file?

.iam

.ass

.ipt

.asf

Answer

Correct Answer: .iam

Note: This Question is unanswered, help us to find answer for this one

56. What is the purpose of the view cube?

It calculates the envelope volume of a solid

It provides a sectional view for solids

It provides a means to store saved views

It provides quick access to standard and isometric views

It provides a preview of a render

Answer

Correct Answer: It provides quick access to standard and isometric views

Note: This Question is unanswered, help us to find answer for this one

57. A design layout is a ______ drawing.

intricate

big

Answer

Correct Answer: 2D

Note: This Question is unanswered, help us to find answer for this one

58. True or false? Editing a component in assembly, it modifies all instances of the component in its source file and in other assemblies.

FALSE

True

Answer

Correct Answer: True

Note: This Question is unanswered, help us to find answer for this one

59. The ______ command creates a copy of sketch across an axis.

flip

mirror

duplicate

switch

Answer

Correct Answer: mirror

Note: This Question is unanswered, help us to find answer for this one

60. Presentations are saved as _____ files.

.ipn

.iam

.doc

.pst

Answer

Correct Answer: .ipn

Note: This Question is unanswered, help us to find answer for this one

61. In an assembly, what constraint would provide the quickest means to constrain a bolt to a hole?

Tangent

The time would be equal for all

Insert

Mate

Answer

Correct Answer: Insert

Note: This Question is unanswered, help us to find answer for this one

62. You use this tool to measure the space between components in an assembly :

Distance.

Ruler.

Length.

Measure.

Answer

Correct Answer: Measure.

Note: This Question is unanswered, help us to find answer for this one

63. Constraint inference and persistence:

Is a fixed setting

Can be switched on and off

Is only applied when constraints are visible

Is only applied while dimensioning

Answer

Correct Answer: Can be switched on and off

Note: This Question is unanswered, help us to find answer for this one

64. All of these items are located in the Representations folder EXCEPT :

Position.

Level of Detail.

View.

Browser Folder.

Answer

Correct Answer: Browser Folder.

Note: This Question is unanswered, help us to find answer for this one

65. True or False? Part Files hold together Assembly Files.

True

False

Answer

Correct Answer: False

Note: This Question is unanswered, help us to find answer for this one

Autodesk Inventor MCQs | Topic-wise

MCQ on Basic Autodesk Inventor

General Autodesk Inventor MCQs

Autodesk Inventor Subjects

More Resources

Autodesk Inventor MCQ

Autodesk Inventor Skill Assessment

Autodesk Inventor PDF

Related MCQs

Autodesk Revit MCQs

Automotive Engineering, Vehicle engineering MCQs

Biochemical Engineering MCQs

Biological Engineering MCQs

Biomedical Engineering MCQs