General Autodesk Inventor MCQs

1. Inventor was primarily created for modeling and analysis of:

2. True or False? Part Files hold together Assembly Files.

3. All of these items are located in the Representations folder EXCEPT :

4. Constraint inference and persistence:

5. You use this tool to measure the space between components in an assembly :

6. In an assembly, what constraint would provide the quickest means to constrain a bolt to a hole?

7. Presentations are saved as _____ files.

8. The Project Geometry command copies to the current sketch:

9. The ______ command creates a copy of sketch across an axis.

10. True or false? Editing a component in assembly, it modifies all instances of the component in its source file and in other assemblies.

11. A design layout is a ______ drawing.

12. The Hole command will build a hole at:

13. What is the purpose of the view cube?

14. What is the extension for an assembly file?

15. A feature that adds depth to a sketch is called a/an __________ feature.

16. Which of the following is the file extension for an Inventor drawing?

17. You would use the fillet feature to ________.

18. To render and animate, you should use ________.

19. A 3D Sketch provides the ability to produce geometry that is the result of:

20. What is the basic file type of Inventor?

21. True or false? Drawing files can contain: sheet formats, title blocks, borders, and sketched blocks.

22. What is the extension of a part file?

23. True or false? A 2D sketch is the first step of the parametric modeling process.

24. What term describes testing how an object will react under real world stress (weight, torque, etc.)?

25. What does FEA stand for?

26. In a drawing, the first view created is the:

27. If you transfer a file from SolidWorks to Autodesk Inventor, you most likely will save it as a ______ file.

28. True of false? If your model fails a stress analysis it will create an exploded view

29. Where will you change the units for a part or assembly.

30. A loop refers to a _________.

31. True or False? Setting a subassembly as "phantom" prevents it from being listed in the bill of materials while still allowing the parts contained within the subassembly to be listed.

32. In a multiuser environment, Inventor's primary means for organizing data, including files, libraries, and revision control is a:

33. True or False? Within Inventor a 'drawing' is 2D.

34. How do you create a tank cone

35. In an assembly, what is the maximum degrees of freedom a component can have?

36. Autodesk Inventor modules don't include:

37. On the Ribbon, View tab, where would you find the command for visual styles?

38. What does HUD stand for?

39. Replace All will replace each occurrence in:

40. To analyze characteristics of an assembly in motion, you would use _______.

41. What is the default Extents option for the Extrude command?

42. Which of the following lists contains only sketch based features?

43. The ______ specifies which add-ins to load at startup.

44. Precise input allows the user to:

45. When creating a drawing view, Tangent Edges:

46. You can create Inventor presentation files by opening a new file with the _____ extension.

47. To join axes you would likely use a _______ constraint.

48. The coordinate system of a sketch:

49. The Loft command will create a loft using:

50. In an Assembly, what constraint would you use to align two part faces so that their direction arrows are parallel?

51. Which would you use to constrain a line to the center of a circle?

52. To specify motion of gears, you would use a _______ constraint.

53. Copying a feature from a part and storing it in a feature file is called __________.

54. True or False? Ribs add support to a component by changing its main shape.

55. To make sure that your parts do not intersect unrealistically, you would use the _________.

56. What is the purpose of making parts and assemblies adaptive?

57. You could use a _______ file to create an exploded view.

58. A ________ constraint error occurs when a component is constrained in a position but subsequent modifications are made to a constrained part.

59. The _______ feature can blend dissimilar 2D sketches on nonintersecting planes.

60. To constrain components together without using a dialog box or on placement use:

61. In a drawing, you can add a dimension to the intersection point of two lines by:

62. To create a sub-assembly from components in an existing assembly:

63. What environment is used when a solid is edited through the Edit Form command?

64. Setting the 1st angle and 3rd angle projections as defaults for a template can be done using:

65. Using Design Accelerator you can design:

66. What tool do you use to change the default color of materials?

67. When you create a Virtual Component in place, you must:

68. What sub menu tool tab is used for repairing and stitching surfaces and solids?

69. Which of the following is NOT used to calculate distortion?

70. What is an *.ipn file used for?

71. Where do you find the "Add Plane" command on the ribbon?

72. How do you edit or add attributes such as dimension style or precision?

73. Where do you find Inventor Studio on the ribbon?

74. What are the default file extensions for ilogic files?