If the tension on the tight side of a belt is 10 newtons, the tension on the slack side is 5 newtons and the velocity of the belt is 10 meters per second, calculate the power transmitted by the belt.

The value of taper of a gib head key is ___________.

The value of the stress concentration factor for static loading for a lap joint or a butt joint is _____.

__________ theory is relevant to ductile materials.

Calculate the resilience of a body having a volume of 1000 cubic meters, which is subjected to a stress of 60 newtons per square meter. The Young's modulus for the material of the body is 2 x 105 newtons per square meter.

What is the value of impact stress on gradually applied loads?

Calculate the strength factor of a gear, given that the maximum bending stress is 40 newtons per square millimeter and the Lewis form factor is 10?

Which type of belt is used for shafts which rotate in opposite direction?

The pitch of the rivet should never be less than ________. Here d is the diameter of the rivet

The module of a gear is 10 millimeters and the number of teeth is 25. Calculate the pitch circle diameter of the gear.

The power transmitted is maximum in a belt drive, when the maximum tension in the belt is _______ the centrifugal tension.