The pitch of the rivet should never be less than ________.
Here d is the diameter of the rivet

Which type of belt is used for shafts which rotate in opposite direction?

Calculate the strength factor of a gear, given that the maximum bending stress is 40 newtons per square millimeter and the Lewis form factor is 10?

Calculate the polar moment of inertia of the shaft having a diameter of 20 millimeters.

The distance between the center of adjacent rivets on adjacent gauge lines is known as ________.

Calculate the circular pitch of a gear whose pitch circle diameter is 100 millimeters and which has 50 teeth.

The value of the stress concentration factor for static loading for a lap joint or a butt joint is _____.

The value of taper of a gib head key is ___________.

If the tension on the tight side of a belt is 10 newtons, the tension on the slack side is 5 newtons and the velocity of the belt is 10 meters per second, calculate the power transmitted by the belt.

If the shaft diameter is 20 millimeters, calculate the pitch circle diameter of the bolts for a flange coupling.

If the twisting moment in the hollow shaft is _______ the twisting moment of the solid shaft, then the strength of the hollow shaft becomes equal to the strength of the solid shaft.