The power transmitted is maximum in a belt drive, when the maximum tension in the belt is _______ the centrifugal tension.

The module of a gear is 10 millimeters and the number of teeth is 25. Calculate the pitch circle diameter of the gear.

The pitch of the rivet should never be less than ________. Here d is the diameter of the rivet

Which type of belt is used for shafts which rotate in opposite direction?

Calculate the strength factor of a gear, given that the maximum bending stress is 40 newtons per square millimeter and the Lewis form factor is 10?

Calculate the polar moment of inertia of the shaft having a diameter of 20 millimeters.

Calculate the resilience of a body having a volume of 1000 cubic meters, which is subjected to a stress of 60 newtons per square meter. The Young's modulus for the material of the body is 2 x 105 newtons per square meter.

__________ theory is relevant to ductile materials.

The value of the stress concentration factor for static loading for a lap joint or a butt joint is _____.

The value of taper of a gib head key is ___________.

If the tension on the tight side of a belt is 10 newtons, the tension on the slack side is 5 newtons and the velocity of the belt is 10 meters per second, calculate the power transmitted by the belt.