> > Engineering Drawing MCQs > Basic Engineering Drawing MCQs

Basic Engineering Drawing MCQ

1. The surface a drawing is created on is called the ______________.

Ground

Finish

Canvas

Media

Answer

Correct Answer: Ground

Note: This Question is unanswered, help us to find answer for this one

2. A drawing instrument set usually contains all of the following, except:

Bow compass

Scale

Dividers

Extra leads

Answer

Correct Answer: Scale

Note: This Question is unanswered, help us to find answer for this one

3. Which angle cannot be made with either a 45 or 30/60 triangle or a combination of the two?

Answer

Correct Answer: 70

Note: This Question is unanswered, help us to find answer for this one

4. Which type of line is particular to section drawings?

Break lines

Phantom lines

Extension lines

Cutting plane lines

Answer

Correct Answer: Cutting plane lines

Note: This Question is unanswered, help us to find answer for this one

5. Which type of line is part of a dimension?

Break lines

Phantom lines

Extension lines

Cutting plane lines

Answer

Correct Answer: Extension lines

Note: This Question is unanswered, help us to find answer for this one

6. Which set of lead grades has a grade out of sequence?

H, HB, B, 3B

7B, H, F, 3H

6B, B, H, 4H

9H, HB, B, 2B

Answer

Correct Answer: 7B, H, F, 3H

Note: This Question is unanswered, help us to find answer for this one

7. Which tool can be used to draw a 90 degree angle?

30/60 triangle

Protractor

Drafting machine

All of the above

Answer

Correct Answer: All of the above

Note: This Question is unanswered, help us to find answer for this one

8. Which type of output device creates images which look and feel like photographs?

Electrostatic plotter

Laser printer

Dye-sublimation printer

Inkjet plotter

Answer

Correct Answer: Dye-sublimation printer

Note: This Question is unanswered, help us to find answer for this one

9. Which of the following input devices does not translate hand movements into instructions for the computer?

Scanner

Mouse

Keyboard

3D Mouse

Answer

Correct Answer: Scanner

Note: This Question is unanswered, help us to find answer for this one

10. All of the following are part of a typical design team, except:

Vendors

Quality control specialists

Manufacturing engineers

Accountants

Answer

Correct Answer: Accountants

Note: This Question is unanswered, help us to find answer for this one

11. Which network system gives outside vendors access to a company’s internal network?

Intranet

Extranet

Internet

Outernet

Answer

Correct Answer: Extranet

Note: This Question is unanswered, help us to find answer for this one

12. Which design process involves responding to the emotional needs of the consumer?

Aesthetic design

Functional design

Systems design

E-business

Answer

Correct Answer: Aesthetic design

Note: This Question is unanswered, help us to find answer for this one

13. Which of the following would be a typical use for Product Data Management?

Tracking potential clients by Marketing

Generating variations of a preliminary design

Searching for how many designs used a particular fastener

Evaluating the strength of a rib support on a cast piece

Answer

Correct Answer: Searching for how many designs used a particular fastener

Note: This Question is unanswered, help us to find answer for this one

14. Which of the following is the responsibility of the production manager?

People

Plants

Processes

All of the above

Answer

Correct Answer: All of the above

Note: This Question is unanswered, help us to find answer for this one

15. Following operations can make use of the CAD database, except:

Designing

Marketing

Producing

None of the above

Answer

Correct Answer: None of the above

Note: This Question is unanswered, help us to find answer for this one

16. All of the following are processes (as opposed to input or output. in a manufacturing business except:

Material

Planning

Documenting

Designing

Answer

Correct Answer: Material

Note: This Question is unanswered, help us to find answer for this one

17. In an oblique drawing, the projection rays are drawn ___ to each other and _ to the plane of projection.

Oblique…..oblique

Oblique…..parallel

Parallel…..oblique

Parallel….parallel

Answer

Correct Answer: Parallel…..oblique

Note: This Question is unanswered, help us to find answer for this one

18. In an oblique drawing, all of the following angles are commonly used for drawing the depth axis, except:

30°

45°

60°

90°

Answer

Correct Answer: 90°

Note: This Question is unanswered, help us to find answer for this one

19. In an oblique sketch of a cube:

The frontal face appears in its true shape

Both receding axes are at 30 degrees to the horizontal

All faces are equally distorted

The depth distances must be reduced

Answer

Correct Answer: The frontal face appears in its true shape

Note: This Question is unanswered, help us to find answer for this one

20. Non-isometric lines are located and sketched how?

They are drawn parallel to the isometric axis.

They are measured using the angle from the multiview.

They are measured using a non-isometric template.

They are located by determining the endpoints of the non-isometric line.

Answer

Correct Answer: They are located by determining the endpoints of the non-isometric line.

Note: This Question is unanswered, help us to find answer for this one

21. One method of drawing an ellipse that represents an isometric pictorial circle is known as:

The box construction method

The coordinate construction method

The four-center approximation method

The offset construction method

Answer

Correct Answer: The box construction method

Note: This Question is unanswered, help us to find answer for this one

22. In an axonometric drawing, the projection rays are drawn ___ to each other and _ to the plane of projection.

Parallel…..oblique

Oblique…..parallel

Parallel…..perpendicular

Parallel….parallel

Answer

Correct Answer: Parallel…..perpendicular

Note: This Question is unanswered, help us to find answer for this one

23. In isometric drawings:

Two axes are perpendicular

True measurements can be made only along or parallel to the isometric axes

All faces are unequally distorted

None of the above

Answer

Correct Answer: True measurements can be made only along or parallel to the isometric axes

Note: This Question is unanswered, help us to find answer for this one

24. In an isometric sketch of a cube:

The frontal face appears in its true shape

The receding axes are at 45 degrees to the horizontal

All faces are equally distorted

Only the depth distances must be reduced

Answer

Correct Answer: All faces are equally distorted

Note: This Question is unanswered, help us to find answer for this one

25. In a trimetric drawing, the relationship of the angle between axes to each other is:

Three are equal

Two are equal

Three are unequal

None of the above

Answer

Correct Answer: None of the above

Note: This Question is unanswered, help us to find answer for this one

26. An axonometric drawing which has all three axes divided by equal angles is:

Dimetric

Trimetric

Orthographic

Isometric

Answer

Correct Answer: Isometric

Note: This Question is unanswered, help us to find answer for this one

27. An axonometric drawing which has two axes divided by equal angles is:

Dimetric

Trimetric

Orthographic

Isometric

Answer

Correct Answer: Dimetric

Note: This Question is unanswered, help us to find answer for this one

28. A circle will appear on an isometric drawing as a(n) __________ .

Ellipse

Cycloid

Circle

Parabola

Answer

Correct Answer: Ellipse

Note: This Question is unanswered, help us to find answer for this one

29. Which of the following projection methods does not use projectors perpendicular to the projection plane?

Isometric

Orthographic

Oblique

Axonometric

Answer

Correct Answer: Oblique

Note: This Question is unanswered, help us to find answer for this one

30. Which of the following is not a pictorial drawing?

Isometric

Multiview

Perspective

Axonometric

Answer

Correct Answer: Multiview

Note: This Question is unanswered, help us to find answer for this one

31. If a client of yours is having difficulty visualizing a design, what type of drawing would be the easiest to understand?

Axonometric

Three-view orthographic

One-view orthographic

Bimetric

Answer

Correct Answer: Axonometric

Note: This Question is unanswered, help us to find answer for this one

Engineering Drawing MCQs | Topic-wise

MCQ on Basic Engineering Drawing

General Engineering Drawing MCQs

Basic Engineering Drawing MCQ

1. The surface a drawing is created on is called the ______________.

2. A drawing instrument set usually contains all of the following, except:

3. Which angle cannot be made with either a 45 or 30/60 triangle or a combination of the two?

4. Which type of line is particular to section drawings?

5. Which type of line is part of a dimension?

6. Which set of lead grades has a grade out of sequence?

7. Which tool can be used to draw a 90 degree angle?

8. Which type of output device creates images which look and feel like photographs?

9. Which of the following input devices does not translate hand movements into instructions for the computer?

10. All of the following are part of a typical design team, except:

11. Which network system gives outside vendors access to a company’s internal network?

12. Which design process involves responding to the emotional needs of the consumer?

13. Which of the following would be a typical use for Product Data Management?

14. Which of the following is the responsibility of the production manager?

15. Following operations can make use of the CAD database, except:

16. All of the following are processes (as opposed to input or output. in a manufacturing business except:

17. In an oblique drawing, the projection rays are drawn _________ to each other and _______ to the plane of projection.

18. In an oblique drawing, all of the following angles are commonly used for drawing the depth axis, except:

19. In an oblique sketch of a cube:

20. Non-isometric lines are located and sketched how?

21. One method of drawing an ellipse that represents an isometric pictorial circle is known as:

22. In an axonometric drawing, the projection rays are drawn _________ to each other and _______ to the plane of projection.

23. In isometric drawings:

24. In an isometric sketch of a cube:

25. In a trimetric drawing, the relationship of the angle between axes to each other is:

26. An axonometric drawing which has all three axes divided by equal angles is:

27. An axonometric drawing which has two axes divided by equal angles is:

28. A circle will appear on an isometric drawing as a(n) __________ .

29. Which of the following projection methods does not use projectors perpendicular to the projection plane?

30. Which of the following is not a pictorial drawing?

31. If a client of yours is having difficulty visualizing a design, what type of drawing would be the easiest to understand?

17. In an oblique drawing, the projection rays are drawn ___ to each other and _ to the plane of projection.

22. In an axonometric drawing, the projection rays are drawn ___ to each other and _ to the plane of projection.