CISCO Quiz # 5

What is the binary value of hex 9F?

10011111

10111000

11110001

10001111

Which of the following switches support both ISL and 802.1Q encapsulation methods?

1900

2950

3550

All of the above

Which command will you use to view sending and receiving of RIP update packets that normally run in the background ?

Router(config-router)# debug ip rip

Router# debug rip packets

Router# debug ip rip

Router(config)# show rip packets

What is the default value of bridge priority on Cisco switches?

65536

16384

32768

256

Which of the following commands will you use to enable RIP version 2 on your router?

Router(config)# version 2

Router(config-router)# version 2

Router(config-if)# version 2

Router# rip version 2

At which layer of OSI Model does a router work?

Presentation Layer

Transport Layer

Network Layer

Datalink Layer

Application Layer

Physical Layer

Session Layer

Which information is exchanged by Cisco devices on which CDP is running?

Routing Tables

Platform

Traffic Data

Capabilities List

Username & Password

You executed the following command on your router:

Router(config)# router ospf 15
Which command will you execute next to complete OSPF configuration on your router?

Router(config-router)# network 172.16.0.0 255.255.0.0 area 5

Router(config)# network 172.16.0.0 0.0.255.255 area 5

Router(config-router)# network 172.16.0.0 0.0.255.255 area 5

Router(config# ip route ospf 172.16.0.0 255.255.0.0 area 5

Which of the following services can be used to set up a database of MAC addresses that can be used for dynamic addressing of VLANs?

Static VLAN

VMPS

STP

VTP

Which command will you use to configure IP address on an interface?

Router(config-if)# ip 192.168.1.1 255.255.255.0

Router(config-if)# ip address 192.168.1.1

Router(config-if)# ip address 192.168.1.1/24

Router(config-if)# ip address 192.168.1.1 255.255.255.0

Router(config-if)# ip address 192.168.1.1 subnet 255.255.255.0

What is the binary value of 157?

11000111

10111001

11100011

10011101

What is the OUI portion of MAC address B4-3F-95-5F-1D-09 in binary?

10110100-00111111-10010101

11100110-11001001-01110011

11000011-10000111-11110001

00111100-10010001-10111001

Which one of the following addresses can be used as a host address for the subnet 192.168.50.16/28?

192.168.50.32

192.168.50.16

192.168.50.64

192.168.50.30

Which of the following are stored in RAM?

Startup-config

Running-config

Routing Table

All of the above

Which of the following commands show Cisco IOS image file name?

show startup

show running

show version

show history

Which type of NAT uses different ports to map multiple IP addresses to a single global IP address?

Dynamic NAT

NAT with overloading

Static NAT

All of the above

What do you understand from the following commands:
access-list 110 deny tcp 192.168.10.0 0.0.0.255 any eq 21
access-list 110 permit ip any any

This access-list denies any Telnet traffic from network 192.168.10.0 255.255.255.0

This access-list allows any IP traffic from any source to any destination

This access-list denies any FTP traffic from network 192.168.10.0 255.255.255.0

This access-list denies any FTP traffic to network 192.168.10.0 255.255.255.0

State whether True or False:
You can only create that number of VLANs which are equivalent to the number of ports on a switch.

True

False

Which of the following VLANs is recommended by Cisco to be used as an administrative VLAN?

VLAN 0

VLAN 1

VLAN 1024

VLAN 16

How many bearer(B) and data(D) channel/s are there in a standard ISDN BRI service?

2B + 1D Channel

23B + 1D Channel

24B + 2D Channels

16B + 1D Channel

What is the command to show Frame relay map table?

Router(config)# show frame-relay map

Router# show frame-relay

Router(config-router)# show frame-relay table

Router# show frame-relay map

State whether True or False:
You have two routers connected with point-to-point links using different encapsulation methods. They will be able to communicate with each other.

True

False

Which encapsulation method will you choose if you want to connect a Cisco router and a non Cisco router with a serial connection?

HDLC

PPP

LAPD

LAPB

Which key combination is used to interrupt the boot sequence of a router?

Esc + Ctrl

Ctrl + Z

Ctrl + Break

Alt + Ctrl + Del

Which protocol uses port number 23?

FTP

SMTP

Telnet

HTTP

What is the decimal equivalent of binary 11001110?

207

250

206

192

How many access control lists can be applied on an interface?

One access control list in each direction for each protocol

Two access control lists in each direction

Unlimited

Access control list cannot be applied on an interface

What is the command for copying a router's IOS to a TFTP server?

copy ios tftp

copy start tftp

copy flash tftp

copy flash-config tftp

You are not able to create a new VLAN and cannot delete or change existing VLANs on a switch. What could be the problem?

Trunk link is not configured properly

The switch is in VTP Transparent mode

The switch is in VTP Client mode

None of the above

What is the network ID of IP address 172.16.40.0/20?

172.16.16.0

172.16.36.0

172.16.32.0

172.16.0.0

Quiz:	CISCO Quiz # 5
Subject:	Basic Cisco
Total Questions:	30 MCQs
Time:	30 Minutes

What is the binary value of hex 9F?

Which of the following switches support both ISL and 802.1Q encapsulation methods?

Which command will you use to view sending and receiving of RIP update packets that normally run in the background ?

What is the default value of bridge priority on Cisco switches?

Which of the following commands will you use to enable RIP version 2 on your router?

At which layer of OSI Model does a router work?

Which information is exchanged by Cisco devices on which CDP is running?

You executed the following command on your router: Router(config)# router ospf 15 Which command will you execute next to complete OSPF configuration on your router?

Which of the following services can be used to set up a database of MAC addresses that can be used for dynamic addressing of VLANs?

Which command will you use to configure IP address on an interface?

What is the binary value of 157?

What is the OUI portion of MAC address B4-3F-95-5F-1D-09 in binary?

Which one of the following addresses can be used as a host address for the subnet 192.168.50.16/28?

Which of the following are stored in RAM?

Which of the following commands show Cisco IOS image file name?

Which type of NAT uses different ports to map multiple IP addresses to a single global IP address?

What do you understand from the following commands: access-list 110 deny tcp 192.168.10.0 0.0.0.255 any eq 21 access-list 110 permit ip any any

State whether True or False:You can only create that number of VLANs which are equivalent to the number of ports on a switch.

Which of the following VLANs is recommended by Cisco to be used as an administrative VLAN?

How many bearer(B) and data(D) channel/s are there in a standard ISDN BRI service?

What is the command to show Frame relay map table?

State whether True or False:You have two routers connected with point-to-point links using different encapsulation methods. They will be able to communicate with each other.

Which encapsulation method will you choose if you want to connect a Cisco router and a non Cisco router with a serial connection?

Which key combination is used to interrupt the boot sequence of a router?

Which protocol uses port number 23?

What is the decimal equivalent of binary 11001110?

How many access control lists can be applied on an interface?

What is the command for copying a router's IOS to a TFTP server?

You are not able to create a new VLAN and cannot delete or change existing VLANs on a switch. What could be the problem?

What is the network ID of IP address 172.16.40.0/20?

You executed the following command on your router:

Router(config)# router ospf 15
Which command will you execute next to complete OSPF configuration on your router?

What do you understand from the following commands:
access-list 110 deny tcp 192.168.10.0 0.0.0.255 any eq 21
access-list 110 permit ip any any

State whether True or False:
You can only create that number of VLANs which are equivalent to the number of ports on a switch.

State whether True or False:
You have two routers connected with point-to-point links using different encapsulation methods. They will be able to communicate with each other.