Installing the HRA role service configures the following:

The ______ type enforces NAP for remote access connections using a VPN server running Win Server 2008 or Win Server 2008 R2 and Routing and Remote Access.

Typically - a NAP deployment occurs in three phases:

VLANs are identified using a VLAN identifier - which must be configured on the switch itself. You can then use NAP to specify in which VLAN the ______ computers are placed.

You can also use IPsec connection security to allow healthy computers to ______ healthy computers.

The 802.1X access point applies the ACL to the connection and ______ all packets that are not allowed by the ACL.

If a computer falls out of compliance after connecting to the 802.1X network - the 802.1X network access device can change the computer's ______.

The ______ are the client components that create a Statement of Health (SoH) containing a description of the health of the client computer.

The NAP health policy server uses the ______ to determine the level of access the client computer should have and whether any remediation is necessary.

______ define which health checks a client must meet to be considered compliant.

The ______ enforcement type uses Ethernet switches or wireless access points that support 802.1X authentication.