Correct Answer: Both microprocessors and microcontrollers can be used
Explanation:
Note: This Question is unanswered, help us to find answer for this one
Embedded Systems Skill Assessment
Your Skill Level: Poor
Retake Quizzes to improve it
More Embedded Systems MCQ Questions
How many times is the following loop performed? MOV R6, #200 BACK: MOV R5, #100 HERE: DJNZ R5, HERE DJNZ R6, BACK
The Atmega 16 micro controller is a __________.
What number should be loaded into the TH register using mode 2 to get 100μsec delay? (Assume XTAL=11.0592MHz)
ARM3 was produced with __________.
How would -34H be represented as a signed number in 2s complement in 8051?
The complete data exchange between the simulation and the μC is realized via the standard debugger interface, so the hardware effort for the coupling is minimal in comparison to other HIL simulation approaches where every ____ pin itself has to be connected to the interface of the simulation computer?
Choose the most probable reason for the compile error. If you are developing code for an early model ARM Cortex processor, your code fails to build and when you remove the line below the code compiles successfully? t = t + 0.01
To record the trace information generated by the Cortex-M3/M4 processors, Lauterbach supports following modes? (check all that apply)
The SCE-MI provides a transport infrastructure between the _____ and the host workstation sides of each channel which interconnects transactor models in the emulator to C (untimed or RTL) models on the workstation?
General purpose processor consists of? (check all that apply)