To record the trace information generated by the Cortex-M3/M4 processors, Lauterbach supports following modes? (check all that apply)

Choose the most probable reason for the compile error. If you are developing code for an early model ARM Cortex processor, your code fails to build and when you remove the line below the code compiles successfully? t = t + 0.01

The complete data exchange between the simulation and the μC is realized via the standard debugger interface, so the hardware effort for the coupling is minimal in comparison to other HIL simulation approaches where every ____ pin itself has to be connected to the interface of the simulation computer?

On reset, What happens in an embedded system?

Using a TRACE32, the generated code was loaded into the control hardware and functionally tested in-situ?

The Multi Core Debug System (MCDS) on the emulation devices provides a counter and trigger systems which extends the normal ___ debug resources?

The Atmega 16 micro controller is a __________.

How many times is the following loop performed? MOV R6, #200 BACK: MOV R5, #100 HERE: DJNZ R5, HERE DJNZ R6, BACK

Which devices are used in Embedded Systems?

Which one of the following files is produced by an 8051 assembler?

The speed of the semiconductor memory is in the range of ___________.